Make sure this part fits

GM 25910858
Coil Spring, Rear

2006-2011 GM

Customer Questions & Expert Answers (13)
GM 25910858 Coil Spring, Rear
  • Part Description
    Spring, Rear Spring; Coil Springs
  • Position
    Rear
  • Replaces
    10390204
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25910858
    Part DescriptionSpring, Rear Spring; Coil Springs
    Other NamesSpring
    Item Dimensions15.0 x 7.7 x 7.4 inches
    Item Weight5.60 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces10390204
    ManufacturerGeneral Motors
    SKU25910858
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Buick LucerneCX, CXL, CXL Special Edition, CXS, Super6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25910858 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25910858 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step in the process for the 2006 Buick Lucerne? Posted by Customer
    A:
    Remove the strut from the vehicle and install it into the Strut Spring Compressor (J 45400).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be done after raising the lower control arm for the 2006 Buick Lucerne? Posted by Customer
    A:
    Install the shock absorber retaining bolts, tightening them to 24 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be done after removing the strut from the J 45400 for the 2009 Buick Lucerne? Posted by Customer
    A:
    Loosen the compressor forcing screw until the upper strut mount and coil spring can be removed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be removed after raising for the 2007 Buick Lucerne? Posted by Customer
    A:
    Remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be used to remove the upper strut mount nut for the 2010 Buick Lucerne? Posted by Customer
    A:
    The J-35669 tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the torque specification for the upper strut mount nut for the 2008 Cadillac DTS? Posted by Customer
    A:
    Tighten it to 85 N.m (63 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be done after installing the Coil Spring Compressor for the 2006 Cadillac DTS? Posted by Customer
    A:
    Gradually lower the control arm until it rests on the support assembly, allowing for the removal of the coil spring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the first step to replace the coil spring (FE7) for the 2007 Cadillac DTS? Posted by Customer
    A:
    First, raise and support the vehicle, then remove the tires and wheels.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What tool is used to lower the lower control arm for the 2009 Cadillac DTS? Posted by Customer
    A:
    Use the J 24319-B Steering Linkage Puller.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the next step after installing the coil spring compressor for the 2010 Cadillac DTS? Posted by Customer
    A:
    Gradually lower the control arm until it rests on the support assembly, then remove the coil spring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What tool is used to hold the strut shaft while removing the upper strut mount nut for the 2007 Cadillac DTS? Posted by Customer
    A:
    A 45 TORX(R) socket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    How do you reassemble the strut with the coil spring and upper strut mount for the 2008 Buick Lucerne? Posted by Customer
    A:
    Install the strut to the coil spring and upper strut mount, then loosely install the strut retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25910858, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25910858 Coil Spring, Rear. It is sometimes referred to as GM Coil Springs. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25910858 Coil Spring, Rear. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery