How to replace the Automatic Transmission Shifter lever on Buick Park Avenue?

One must disable the sir system through required safety precautions before performing shift lever replacement operations on automatic transmissions. Raise the shift lever seal towards the shift lever before you remove the steering column trim covers if required. Detach the shift connector located at the column base before removing the shift lever screw installed on the shift lever assembly. Leaning the shift lever seal to the narrow section of the shift lever while removing the shift lever and seal from the linear shift assembly. Insert the shift lever seal onto the narrow end of shift lever assembly before installing the shift lever assembly to linear shift assembly. The shift lever screw needs to be inserted into the shift lever assembly before final tightening to 20 nm (15 ft. Lbs.). Move the shift lever seal down from end to end of the shift lever assembly until it reaches proper alignment with the steering column trim covers. After reattaching the steering column trim covers enable the sir system if needed.

OEM Buick Park Avenue Automatic Transmission Shifter

AT Shifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Automatic Transmission Shifters found

View related parts
Buick Park Avenue Shift Actuator
Part Number: 26034400
$13.22 MSRP: $21.77
You Save: $8.55 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Transmission Gearshift Control Shifter; Control Assembly; Control Assembly Actuator; Actuator
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Shift Lever
Part Number: 26101680
Product Specifications
- Other Name: Lever Assembly, Automatic Transmission Control; Automatic Transmission Selector Handle; Gear Shift Assembly; Lever, Transmission Control Lever
- Replaces: 10258091, 26056013
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Shift Lever
Part Number: 26101657
Product Specifications
- Other Name: Lever Assembly, Automatic Transmission Control; Automatic Transmission Selector Handle; Gear Shift Assembly; Switch; Lever, Transmission Control Lever
- Replaces: 26056014
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Shift Actuator
Part Number: 15884352
$217.43 MSRP: $325.00
You Save: $107.57 (34%)
Product Specifications
- Other Name: Control, Transmission Shift; Control Assembly; Lock Assembly; Controller; Control, Transmission Shift Control Lever
- Replaces: 26051958
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS

Buick Park Avenue Automatic Transmission Shifter

Our website offers an extensive catalog of genuine Buick Park Avenue Automatic Transmission Shifter at unbeatable prices. Every OEM Buick Park Avenue Automatic Transmission Shifter comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Park Avenue Automatic Transmission Shifter Parts Questions & Experts Answers

Shift Lever
26101680
Q: How to replace the Automatic Transmission Shifter lever on Buick Park Avenue?
A: One must disable the sir system through required safety precautions before performing shift lever replacement operations on automatic transmissions. Raise the shift lever seal towards the shift lever before you remove the steering column trim covers if required. Detach the shift connector located at the column base before removing the shift lever screw installed on the shift lever assembly. Leaning the shift lever seal to the narrow section of the shift lever while removing the shift lever and seal from the linear shift assembly. Insert the shift lever seal onto the narrow end of shift lever assembly before installing the shift lever assembly to linear shift assembly. The shift lever screw needs to be inserted into the shift lever assembly before final tightening to 20 nm (15 ft. Lbs.). Move the shift lever seal down from end to end of the shift lever assembly until it reaches proper alignment with the steering column trim covers. After reattaching the steering column trim covers enable the sir system if needed.