Q: How to replace the PCV Valve Hose at the rear on Buick Enclave?
A: The first step to replace the positive crankcase ventilation tube at the rear requires removal of the fuel injector sight shield along with the Intake Manifold insulator. Positive crankcase ventilation (PCV) fresh air pipe must be disconnected from both the Intake Manifold and the camshaft cover along with the pcv air pipe. The pcv air pipe installation requires first connecting it to the camshaft cover valve before final attachment to the Intake Manifold. The last step brings together the replacement of the Intake Manifold insulator and the fuel injector sight shield.
Q: How to replace the PCV Valve Hose on Buick Rendezvous?
A: You should start crankcase ventilation hose replacement by removing the intake manifold cover. The procedure to replace the pcv foul air tube starts by disconnecting the engine harness clip which is attached to the pcv foul air tube clip then removing the bolt and clip before extracting the tube. The first step of fresh air tube replacement includes detaching the pcv fresh air tube from the intake air duct before extracting the fresh air tube from the rocker cover. Begin by attaching the fresh air tube to the rocker cover followed by its installation to the intake air duct. To repair the pcv foul air tube you should install the tube together with the pcv foul air tube which requires following the fastener notice in service precautions before tightening the pcv foul air tube bolt to 10 nm (89 inch lbs.). Put on the intake manifold cover and fasten the engine harness clip onto the pcv foul air tube clip.