Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Tank Pressure Sensor; Level Sensor; Tank Pressure Sensor; Sensor; Sensor, Early Fuel Evaporation; Sensor, Fuel Tank Meter/Pump
Position: Passenger Side
Replaces: 13502510
Fits the following Buick Models:
Enclave | 2009-2021 | Avenir, Base, Convenience, CX, CXL, Essence, Leather, Preferred, Premium | 6 Cyl 3.6 L GAS
Encore | 2013-2020 | Base, Convenience, Essence, Leather, Preferred, Preferred II, Premium, Sport Touring | 4 Cyl 1.4 L GAS
Envision | 2016-2023 | Avenir, Base, Essence, Preferred, Premium, Premium II | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
LaCrosse | 2008-2019 | Avenir, Base, Convenience, CX, CXL, CXS, Essence, Leather, Preferred, Premium, Sport Touring, Super, Touring | 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
Lucerne | 2009-2011 | CX, CXL, CXL Special Edition, Super | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
Regal | 2011-2017 | Base, CXL, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
Regal Sportback | 2018-2020 | Avenir, Base, Essence, GS, Preferred, Preferred II | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
Regal TourX | 2018-2020 | Base, Essence, Preferred | 4 Cyl 2.0 L GAS
Verano | 2012-2015 | Base, Convenience, Leather, Premium, Turbo | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX
Other Name: Sensor Assembly-Fuel Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Tank Pressure Sensor; Sensor, Computer Control Sensors; Sensor, Fuel Tank Meter/Pump
Replaces: 13579380
Fits the following Buick Models:
Cascada | 2016-2019 | Base, Premium, Sport Touring | 4 Cyl 1.6 L GAS
Envision | 2016-2020 | Base, Essence, Preferred, Premium, Premium II | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
Q: How to replace the fuel pressure sensor on Buick LaCrosse?
A: The replacement process of the fuel tank pressure sensor begins with removing the fuel sender assembly. The next step requires you to disconnect the fuel tank pressure sensor from the fuel sender assembly. Proper replacement begins by putting the new fuel tank pressure sensor onto the fuel sender assembly followed by installing the fuel sender assembly.
Q: How to replace the fuel pressure sensor on Buick LeSabre?
A: Starting to replace the Fuel Tank Pressure Sensor requires removal of rear compartment floor trim followed by removing fuel sender access panel bolts and removing its panel. The first step requires separating the fuel tank pressure (FTP) sensor electrical connector before removing the FTP sensor from the system. Start by installing the FTP Sensor while also connecting its electrical connector. Insert the fuel sender access panel before doling up the bolts according to the Fastener Notice in Service Precautions specification of 2 N.m (18 lb in). The last step in the reinstall process should involve putting back the rear compartment floor trim.
Q: How to replace the Fuel Pressure Sensor (RPO NT7) on Buick Lucerne?
A: The replacement process of the Fuel Tank Pressure Sensor (RPO NT7) starts with removing the rear compartment liner first. As the first step you must remove the bolts which secure the fuel sender access hole cover then remove the cover itself. The operations start with disconnecting the fuel level sensor wiring harness electrical connector from the fuel tank pressure sensor to remove the sensor. Start by mounting the new fuel tank pressure sensor and joining the fuel level sensor wiring harness electrical connector to it during installation. Set the fuel sender access hole cover into its position before placing cover bolts that need to be tightened to 2 N.m (18 lb in). Install the rear compartment liner as the last step.