How to Replace the A/C Switch in a Manual HVAC Control Module on Buick Rendezvous?

The i/p cluster trim plate bezel must be removed before removal of the retaining screws which secure the HVAC Control Module. Remove the HVAC Control Module through the i/p opening then unplug its electrical connector. Connect the electrical connector only after putting the key in the off position to perform proper calibration of the HVAC Control Module installation. Funnel the HVAC Control Module into its i/p position before securing it with retaining screws while tightening these screws to 2.5 n.m (22 lb in). After replacing the i/p cluster trim plate bezel you should reinstall it. Self-calibration requires that drivers keep all HVAC Control Module settings untouched since improper hvac operation could result. The system needs one minute of continuous engine operation before calibration completes successfully.

OEM Buick Rendezvous A/C Switch

Air Conditioning Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 A/C Switches found

View related parts
Buick Rendezvous Heater Control
Part Number: 10339960
Product Specifications
- Other Name: Control Assembly-Heater & A/C; Climate Control Module; Blower Control Switch; Dash Control Unit; Control, Heater And A/C Control
- Replaces: 10322839, 10317836
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Buick Rendezvous Heater Control
Part Number: 15817915
Product Specifications
- Other Name: Control Assembly-Heater & A/C; Climate Control Module; Blower Control Switch; Dash Control Unit; Control, Heater And A/C Control
- Replaces: 10339958, 10318549
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Buick Rendezvous Heater Control
Part Number: 15817911
Product Specifications
- Other Name: Control Assembly-Heater & A/C; Climate Control Module; Blower Control Switch; Dash Control Unit; Control, Heater And A/C Control
- Replaces: 10339961, 10428836
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

Buick Rendezvous A/C Switch

Our website offers an extensive catalog of genuine Buick Rendezvous A/C Switch at unbeatable prices. Every OEM Buick Rendezvous A/C Switch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Rendezvous A/C Switch Parts Questions & Experts Answers

Heater Control
10339960
Q: How to Replace the A/C Switch in a Manual HVAC Control Module on Buick Rendezvous?
A: The i/p cluster trim plate bezel must be removed before removal of the retaining screws which secure the HVAC Control Module. Remove the HVAC Control Module through the i/p opening then unplug its electrical connector. Connect the electrical connector only after putting the key in the off position to perform proper calibration of the HVAC Control Module installation. Funnel the HVAC Control Module into its i/p position before securing it with retaining screws while tightening these screws to 2.5 n.m (22 lb in). After replacing the i/p cluster trim plate bezel you should reinstall it. Self-calibration requires that drivers keep all HVAC Control Module settings untouched since improper hvac operation could result. The system needs one minute of continuous engine operation before calibration completes successfully.