Make sure this part fits

GM 10339960
Heater Control

2002-2007 Buick Rendezvous

Customer Questions & Expert Answers (7)
GM 10339960 Heater Control
GM 10339960 Heater Control
  • Part Description
    Control Assembly-Heater & A/C; Climate Control Module; Blower Control Switch
  • Replaces
    10322839, 10317836
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number10339960
    Part DescriptionControl Assembly-Heater & A/C; Climate Control Module; Blower Control Switch
    Other NamesDash Control Unit; Control, Heater And A/C Control
    Item Dimensions11.8 x 8.5 x 5.3 inches
    Item Weight1.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces10322839, 10317836
    ManufacturerGeneral Motors
    SKU10339960
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 10339960 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10339960 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace the A/C Switch in a Manual HVAC Control Module on Buick Rendezvous? Posted by Customer
    A:
    The i/p cluster trim plate bezel must be removed before removal of the retaining screws which secure the HVAC Control Module. Remove the HVAC Control Module through the i/p opening then unplug its electrical connector. Connect the electrical connector only after putting the key in the off position to perform proper calibration of the HVAC Control Module installation. Funnel the HVAC Control Module into its i/p position before securing it with retaining screws while tightening these screws to 2.5 n.m (22 lb in). After replacing the i/p cluster trim plate bezel you should reinstall it. Self-calibration requires that drivers keep all HVAC Control Module settings untouched since improper hvac operation could result. The system needs one minute of continuous engine operation before calibration completes successfully.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the HVAC control module for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Remove the I/P cluster trim plate bezel and the retaining screws for the HVAC control module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    How should the retaining screws be installed for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Ensure to install the retaining screws and tighten them to 2.5 N.m (22 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What needs to be disconnected before removing the HVAC control module completely for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Disconnect the aspirator hose and the electrical connector from the HVAC control module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What should be connected after the electrical connector for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Connect the aspirator hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    How do you remove the HVAC control module for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Carefully pull the HVAC control module out from the IP and disconnect the aspirator hose and the electrical connector from the module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 10339960, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 10339960 Heater Control. It is sometimes referred to as GM A/C Switch, GM Blower Control Switches. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 10339960 Heater Control. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Buick parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery