How to replace the Wiper Pulse Module on Buick Rendezvous?

To replace the Wiper Pulse Module, start by removing the wiper arms, air inlet grille panel, underhood electrical center and Cruise Control Module. Unplug the Wiper Motor cover place then remove the encoder wiper systems drive module nuts and take out the encoder wiper systems drive module from the back compartment of the engine. For installation place the system wiper drive module to the cowl and follow fastener notice in service precautions while installing wiper system drive module bolts and tighten them to 9 n.m (80 lb.in.). Then, connect the Wiper Motor cover electrical connector, re-installate the Cruise Control Module and bracket as well as the underhood electrical center, air inlet grille panel, and the wiper arms.

OEM Buick Rendezvous Wiper Pulse Module

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Pulse Modules found

View related parts
Buick Rendezvous Wiper Transmission
Part Number: 10310227
Product Specifications
- Other Name: Module, Windshield Wiper Motor; Linkage Assembly
- Replaces: 10303632, 10413107
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Buick Rendezvous Control Module
Part Number: 12494841
Product Specifications
- Other Name: Module Assembly, Windshield Wiper Pulse Control; Wiper Pulse Module; Module, Windshield Wiper Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

Buick Rendezvous Wiper Pulse Module

Our website offers an extensive catalog of genuine Buick Rendezvous Wiper Pulse Module at unbeatable prices. Every OEM Buick Rendezvous Wiper Pulse Module comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Rendezvous Wiper Pulse Module Parts Questions & Experts Answers

Wiper Transmission
10310227
Q: How to replace the Wiper Pulse Module on Buick Rendezvous?
A: To replace the Wiper Pulse Module, start by removing the wiper arms, air inlet grille panel, underhood electrical center and Cruise Control Module. Unplug the Wiper Motor cover place then remove the encoder wiper systems drive module nuts and take out the encoder wiper systems drive module from the back compartment of the engine. For installation place the system wiper drive module to the cowl and follow fastener notice in service precautions while installing wiper system drive module bolts and tighten them to 9 n.m (80 lb.in.). Then, connect the Wiper Motor cover electrical connector, re-installate the Cruise Control Module and bracket as well as the underhood electrical center, air inlet grille panel, and the wiper arms.