How to replace the wiper arm on Buick Rendezvous?

First, adjust the ignition to accy and use the Wiper Switch to set it to delay, and then make sure the ignition is off after the wiper arms stop in the innerwipe position and are not moving. Take off the washer hose from the nozzle, take off the cover from the Wiper Arm nut, and take out the nut from the pivot shaft. Pull the Wiper Arm off the wiper transmission drive shaft using Wiper Arm puller (J 39822), and then take off the Wiper Blade from the arm. Take a soft wire brush and clean the knurls on the wiper transmission pivot shaft. Put the Wiper Blade onto the Wiper Arm first and after that install the Wiper Arm onto the wiper transmission pivot shaft. Hold the driver side Wiper Arm blade tip to the marker on the passenger side of the glass when tightening the nut, and follow the same step on the passenger side with the Wiper Blade tip against the driver side glass mark. Screw the Wiper Arm nut onto the wiper transmission pivot shaft and use 48 n.m (35 lb ft) of torque to tighten it. Put the cap over the Wiper Arm nut, apply some windshield washer solvent to the hose for better fitting onto the nozzle, and attach the hose to the nozzle. Check the wipers to be sure they work as they should.

OEM Buick Rendezvous Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Wiper Arms found

View related parts
Buick Rendezvous Wiper Arm, Rear
Part Number: 10323561
Product Specifications
- Other Name: Arm, Rear Window Wiper; Rear Arm
- Position: Rear
- Replaces: 10446627, 22143294, 12487604, 88958132
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Buick Rendezvous Wiper Arm, Driver Side
Part Number: 10317150
Product Specifications
- Other Name: Arm, Windshield Wiper Arm; Front Arm
- Position: Driver Side
- Replaces: 88891178, 12494797
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Buick Rendezvous Wiper Blade Refill, Passenger Side
Part Number: 88892786
Product Specifications
- Other Name: Wiper, Windshield Wiper Blade; Wiper Blade Insert
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Buick Rendezvous Wiper Blade Refill, Driver Side
Part Number: 12494806
Product Specifications
- Other Name: Wiper, Windshield Wiper Blade; Wiper Blade Insert
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Buick Rendezvous Wiper Arm, Passenger Side
Part Number: 10306470
Product Specifications
- Other Name: Arm, Windshield Wiper Arm; Front Arm
- Position: Passenger Side
- Replaces: 12494798, 88891177
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

Buick Rendezvous Wiper Arm

Our website offers an extensive catalog of genuine Buick Rendezvous Wiper Arm at unbeatable prices. Every OEM Buick Rendezvous Wiper Arm comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Rendezvous Wiper Arm Parts Questions & Experts Answers

Wiper Arm, Driver Side
10317150
Q: How to replace the wiper arm on Buick Rendezvous?
A: First, adjust the ignition to accy and use the Wiper Switch to set it to delay, and then make sure the ignition is off after the wiper arms stop in the innerwipe position and are not moving. Take off the washer hose from the nozzle, take off the cover from the Wiper Arm nut, and take out the nut from the pivot shaft. Pull the Wiper Arm off the wiper transmission drive shaft using Wiper Arm puller (J 39822), and then take off the Wiper Blade from the arm. Take a soft wire brush and clean the knurls on the wiper transmission pivot shaft. Put the Wiper Blade onto the Wiper Arm first and after that install the Wiper Arm onto the wiper transmission pivot shaft. Hold the driver side Wiper Arm blade tip to the marker on the passenger side of the glass when tightening the nut, and follow the same step on the passenger side with the Wiper Blade tip against the driver side glass mark. Screw the Wiper Arm nut onto the wiper transmission pivot shaft and use 48 n.m (35 lb ft) of torque to tighten it. Put the cap over the Wiper Arm nut, apply some windshield washer solvent to the hose for better fitting onto the nozzle, and attach the hose to the nozzle. Check the wipers to be sure they work as they should.