Make sure this part fits

GM 10323561
Wiper Arm, Rear

1997-2007 GM

Customer Questions & Expert Answers (15)
GM 10323561 Wiper Arm, Rear
GM 10323561 Wiper Arm, Rear
  • Part Description
    Arm, Rear Window Wiper
  • Position
    Rear
  • Replaces
    10446627, 22143294, 12487604, 88958132
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    1999-2005 Pontiac MontanaBase6 Cyl 3.4 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10323561 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10323561 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you install the new rear wiper blade for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Attach the rear wiper blade onto the rear wiper arm, ensuring it aligns with the mark on the rear window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What is the first step to replace the rear wiper arm for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Use tape or an erasable marker to mark the position of the wiper blade on the rear window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What is the first step to replace the wiper arm for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Turn the ignition switch to the ACCY position and set the wiper switch to the DELAY position, then turn the ignition OFF when the wiper arms are in the innerwipe position and not moving.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How do you install the wiper arm onto the wiper transmission pivot shaft for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Hold the driver side wiper arm blade tip to the target mark located on the passenger side of the glass while tightening the nut to specification.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should be removed from the wiper arm before taking it off for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Remove the cover from the wiper arm nut and take off the wiper arm nut from the wiper transmission pivot shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How should the wiper arm be positioned during installation for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Install the wiper arm onto the wiper transmission driveshaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should be done after removing the wiper arm for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Remove the wiper blade from the wiper arm and clean the knurls of the wiper transmission drive shaft with a wire brush.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should be done after positioning the wiper arms for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Install the nut onto the wiper transmission drive shaft and tighten it to 48 N.m (35 lb ft), then cover the nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should be done after positioning the rear wiper arm for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Install the rear wiper arm nut onto the spindle and tighten it to 25 N.m (18.4 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How do you install the new rear wiper blade for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Attach the rear wiper blade onto the rear wiper arm and position the arm onto the wiper motor, aligning the blade with the mark on the rear window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What is the next step after removing the wiper arm for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Detach the wiper blade from the wiper arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should be removed after marking the position for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Remove the rear wiper arm nut cap and the rear wiper arm nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What is the first step in the installation process for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Attach the wiper blade onto the wiper arm and position the wiper arm onto the wiper drive system module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How do you install the new rear wiper blade for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Attach the rear wiper blade onto the rear wiper arm, then position the arm onto the wiper motor, ensuring the blade aligns with the mark on the rear window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Wiper Arm, Rear 10323561 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10323561 Wiper Arm, Rear is available in the market under the name GM Wiper Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10323561 Wiper Arm, Rear fits certain Chevrolet Venture models, as well as Buick Rendezvous. Additionally, it is compatible with Pontiac Montana, Trans Sport and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 10323561 maintains top performance when functioning as the Arm, Rear Window Wiper unit at its Rear. The component 10323561 is constructed from durable material and its dimensions span 13.1 x 1.5 x 1.1 inches while weighing 2.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Rear Arm. The part 10323561 has available replacement options 10446627, 22143294, 12487604, 88958132. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.