Make sure this part fits

GM 88892786
Wiper Blade Refill, Passenger Side

2001-2007 GM

Customer Questions & Expert Answers (14)
GM 88892786 Wiper Blade Refill, Passenger Side
  • Part Description
    Wiper, Windshield Wiper Blade
  • Position
    Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2001-2005 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 88892786 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88892786 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you remove the wiper blade from the wiper arm for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Push in the button of the wiper blade clip to remove the wiper blade from the inside radius of the wiper arm, then bring the wiper arm out through the opening in the wiper blade.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What should be done after attaching the rear wiper blade for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Install the rear wiper arm onto the rear wiper motor spindle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How should the measuring device be held during measurement for the 2005 Buick Rendezvous? Posted by Customer
    A:
    The measuring device should be held at 90 degrees (perpendicular) to the wiper blade tip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should be removed after the rubber wiper element for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Remove the element vertebra and end cap from the rear wiper blade.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What is the first step in installing a new rear wiper blade element for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Start by placing the end cap on the rear wiper blade, ensuring it is positioned on the end farthest from the rear wiper motor drive shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    How do you install the new rear wiper blade for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Attach the rear wiper blade onto the rear wiper arm, ensuring it aligns with the mark on the rear window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What is the first step to replace the wiper arm for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Turn the ignition switch to the ACCY position and set the wiper switch to the DELAY position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How can you determine if the wiper blade element needs to be replaced for the 2004 Buick Rendezvous? Posted by Customer
    A:
    If the rubber element that contacts the glass is not aligned on the centerline of the blade within +/-15 degrees, replace the wiper blade element.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What is the first step to replace the wiper blade for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Turn the ignition switch to the ACCY position and set the wiper switch to the DELAY position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What is the next step after removing the wiper blade for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Detach the bottom claws of the wiper blade from the notches in the wiper blade element and pull the wiper blade element out through the wiper blade claws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What should be done after positioning the wiper arms for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Install the wiper arm nut onto the wiper transmission driveshaft and tighten it to 48 N.m (35 lb ft), then install the cover on the wiper arm nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should be done after turning off the ignition for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Disconnect the washer hose from the washer nozzle and remove the cover from the wiper arm nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should be removed from the wiper arm before taking it off for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Remove the cover from the wiper arm nut and take off the wiper arm nut from the wiper transmission pivot shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Wiper Blade Refill, Passenger Side 88892786 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88892786 Wiper Blade Refill, Passenger Side is available in the market under the name GM Windshield Wiper, Wiper Arm, Wiper Blade. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88892786 Wiper Blade Refill, Passenger Side fits certain Buick Rendezvous models, as well as Pontiac Aztek models.
The original GM component designated by manufacturer part number 88892786 maintains top performance when functioning as the Wiper, Windshield Wiper Blade unit at its Passenger Side. The component 88892786 is constructed from durable material and its dimensions span 24.7 x 3.2 x 2.7 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Wiper Blade Insert. The part 88892786 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.