Other Name: Headlamp Kit, (Service); Headlight; Headlamp, Capsule/Headlamp/Fog Lamp
Replaces: 15145305, 15826027, 25748361, 15276231
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2006-2007 Cadillac CTS | Base, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.0 L GAS
| Page 1 of 2 |Next >
1-20 of 32 Results
Cadillac CTS Headlight
Our website offers an extensive catalog of genuine Cadillac CTS Headlight at unbeatable prices. Every OEM Cadillac CTS Headlight comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Cadillac CTS Headlight Parts Questions & Experts Answers
Q: How to replace the headlight assembly or headlight bulb, as well as the cornering, sidemarker, park, or turn signal bulb on Cadillac CTS?
A: You need to elevate and support your vehicle first before working on either headlamp installation or its bulb replacement along with any cornering, sidemarker, park, or turn signal bulb changes. Pull out the retaining push-pin of the air deflector to see the fascia extension retainers and open the hood afterward. To unlock movement of the grille pull out both push-pin retainers on top before removing the first one past centerline. Pull the front fascia to the side. Use a wrench to remove both fasteners. One connects front fascia to the fender and the other connects the fascia bolt to the fender. Push the fascia forward until its studs fit the enlarged key slot section and then ease the fascia down to detach it from the fender. Disconnect the headlamp by taking out its 3 bolts and detaching the headlamp washer hose if present. Special effort is needed to push the headlamp directly away from the vehicle while disconnecting it from the fender socket before unlinking the electrical contacts behind the lamp. Push the top of the front fascia until you have sufficient space to take out the headlamp assembly from your vehicle. After that disconnect the headlamp bulb cover and bulb from the assembly. Begin with installing the bulb inside the headlamp assembly before placing the headlamp bulb cover. Reinsert the headlamp assembly into its position through the opening of the front fascia after you push the top of the grille forward. Then connect the electrical wires at the back of the assembly. To attach the ball stud to the fender slot needs considerable pushing pressure. Secure the headlamp with 3 bolts and tighten them to 6 N.m (53 lb in). Push the fascia upward to connect studs with fender keys before shifting it toward the fender and screwing bolts (numbers 1 and 2), tightening them to 9 N.m or 80 lb in. Fasten the upper part of the front fascia and grille to their support bar through push-pin retainers before lowering the car after placing and securing the airflow deflector.