Other Name: Bulb, Capsule/Headlamp/Fog Lamp; Fog Light Bulbs; Headlight Bulbs; Car Bulbs; High Beam Bulb; Parking Lamp Bulb; Fog Lamp Bulb; Lower Beam Bulb; Bulb
Replaced by: 13503417
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2008-2015 Cadillac CTS | Base, Luxury, Performance, Premium, V, Vsport, Vsport Premium | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
Other Name: Bulb, Front Turn Signal Lamp; Turn Signal Bulbs; Tail Light Bulbs; Car Bulbs; Bulbs for Parking, Marker, High Mount, Exterior, License, Turn Signal, Chassis, Courtesy, Headlamp, Tail
Position: Front
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2003-2007 Cadillac CTS | Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
Other Name: Bulb, Daytime Running Lamp; Daytime Running Light Bulb; Turn Signal Bulbs; Car Bulbs; Signal Bulb; Daytime Run Lamp; Run Lamp Bulb; Bulbs; Bulb, Capsule/Headlamp/Fog Lamp
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2008-2015 Cadillac CTS | Base, Luxury, Performance, Premium, V, Vsport, Vsport Premium | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
Other Name: Bulb; Headlight Bulbs; Car Bulbs; Headlamp Bulb; Lower Beam Bulb
Replaces: 12335923, 25735603
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2003-2007 Cadillac CTS | Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
Cadillac CTS Headlight Bulb
Our website offers an extensive catalog of genuine Cadillac CTS Headlight Bulb at unbeatable prices. Every OEM Cadillac CTS Headlight Bulb comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Cadillac CTS Headlight Bulb Parts Questions & Experts Answers
Q: How to Replace the Headlight Bulb on Cadillac CTS?
A: The first step to change a headlamp bulb is to elevate the vehicle while providing support. You need to open the hood after removing the push-pin retainers from the air deflector to reach the fascia extension retainers. The push pin retainers securing the grille and fascia to the upper tie bar need to be removed. Pull out the first push pin retainer beyond the center point to enable the grille to bend. The front fascia extension should be taken off next while the vehicle owner removes two bolts holding the front fascia to the fender and loosens a third bolt that connects the fascia to the fender. Align the fascia studs into the enlarged fender slot section while pulling the fascia toward you until it frees from the front fender pieces. To replace the headlamp successfully you need to remove the three bolts which fasten the headlamp to the vehicle while also discharging the headlamp washer hose if present and disconnecting the headlamp electrical connector. A strong force will be necessary to move the headlamp directly forward while extracting it from the fender socket that connects to the ball stud. The technician should move the front fascia and grille assembly ceiling upward until the headlamp assembly becomes removable from the car and after that remove the bulb cover and bulb from the bracket while maintaining halogen bulb safety protocols. To install the new bulb you need to insert it into the headlamp assembly before restoring its bulb cover. Position the assembly in its original place by using front fascia and grille to create clearance. Connect the electrical connectors of the headlamps before shoving the mount backward until the ball stud slot into the fender socket with enough strength for proper installation. Use three bolts to fasten the headlamp while tightening them to 6 n.m (53 lb in). Push the fascia upwards to set the fascia studs through fender key slots before moving the fascia back to join it with the fender. Finally, use the bolt to fasten the fascia while tightening it to 9 n.m (80 lb in). Reinstall the front fascia extension along with the grille insertion into the upper tie bar using push-pin retainers. Then close the hood before settling the vehicle back to ground level. After setting the vehicle on ground level and completely lowering it you must install the air deflector while securing it with push-pin retainers.