How to replace the door moldings on Cadillac Eldorado?

To substitute the body side molding make sure to have the required tools: Heat Gun (J 25070) and gray double-coated foam tape (3M P/N06380). Start by washing the repair area with Liquid Wash and Wax GM P/N 1052870 to an equal solution, and then dry it out with a cleaner lint-free cloth. Being careful not to scratch the body panel and the back of the molding, eliminate with varnish makers and painters (VM&P) naphtha, or isopropyl alcohol any patches of adhesive residue that remained from the step that was performed just previously. Take masking tape to mark the proper position of the molding by referring the adjoining moldings. Warm the body panel to a minimum of 21°C (70°F) using the Heat Gun, J 25070. Using the gray double-coated foam tape (3M P/N 06380), stick it on the molding, and before installation, close the door. Align the molding from the tape guideline on the body panel, make sure you peel off the backing of the molding on the body panel just before installation and leave it untouched while it is still covered. Separate the two pins on the molding and align them with the two guide holes in the door, fasten the molding to body and apply hand pressure for half a minute down the molding's length to really hold it together on the body. Lastly, take off the masking tape guideline and wipe away any tape residues off the body if so needed.

How to remove the door moldings on Cadillac Eldorado?

To remove the body side molding, you need the following tools: Heat Gun (J 25070), gray double-coated foam tape (3M P/N 06380). Start by cleaning the repair area with Liquid Wash and Wax GM P/N 1052870 or its equivalent, and then dry with a clean lint-free cloth. If there are any adhesive traces on the body panel and the back of the molding, remove them using varnish makers and painters (VM&P) naphtha or isopropyl alcohol. Mask the proper position of the molding with the masking tape; adjacent moldings may be used as their guide. Warm the body panel up to a minimum of 21°C (70°F) by using the Heat Gun (J 25070). Apply the grey double-coated foam tape (3M P/N 06380) to the molding, and close the door before installation. Layout the molding while lining it with the tape guideline placed into the body panel; make sure you pull off the backing from the molding just before installation without it touching the adhesive. Now align the two pins on the molding with the guide holes on the door, fix the molding onto the body & apply hand pressure over it's length for 30 seconds to have a good bond with it. Finally, take off the masking tape guideline and clean any tape traces on the body, if needed.

OEM Cadillac Eldorado Door Moldings

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

35 Door Moldings found

View related parts
Cadillac Eldorado Body Side Molding, Passenger Side Part Number: 3635219
$163.24 MSRP: $244.00
You Save: $80.76 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding Kit, Front Side Door Center (Left-Hand); Door Moldings
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Cadillac Eldorado | Base, Sport, Touring | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
View related parts
Cadillac Eldorado Body Side Molding, Driver Side Part Number: 3635220
$161.10 MSRP: $240.80
You Save: $79.70 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding Kit, Front Side Door Center (Right-Hand); Door Moldings
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Cadillac Eldorado | Base, Sport, Touring | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
View related parts
Cadillac Eldorado Body Side Molding, Driver Side Part Number: 3635714
$161.10 MSRP: $240.80
You Save: $79.70 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding Kit, Front Side Door Center (Left-Hand) W/Name Plate 'Touring Coupe; Door Moldings
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Cadillac Eldorado | Base, Sport, Touring | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
View related parts
Cadillac Eldorado Molding, Black, Driver Side Part Number: 20635603
Product Specifications
- Other Name: Moulding Assembly-Reveal Front Door Window At Belt *Black; Door Moldings; Molding, Front Door Window Reveal
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1991 Cadillac Eldorado | Base, Biarritz, Spring Edition, Touring | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
View related parts
Cadillac Eldorado Body Side Molding, Passenger Side Part Number: 3635713
$161.10 MSRP: $240.80
You Save: $79.70 (34%)
Product Specifications
- Other Name: Molding Kit, Front Side Door Center (Right-Hand) W/Name Plate 'Touring Coupe; Door Moldings
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Cadillac Eldorado | Base, Sport, Touring | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
View related parts
Cadillac Eldorado Body Side Molding, Rear Part Number: 20204405
Product Specifications
- Other Name: Molding, Rear Side Door; Door Moldings; Molding; Molding, Front Fender And Body Ornamentation
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Cadillac Eldorado | Base, Biarritz | 8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Cadillac Eldorado Molding, Front Upper Part Number: 20237688
Product Specifications
- Other Name: Molding, Front Side Door Upper
- Position: Front Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Cadillac Eldorado | Base, Biarritz | 8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Cadillac Eldorado Molding, Passenger Side Part Number: 3637205
Product Specifications
- Other Name: Molding Kit, Front Side Door Center Upper (Right-Hand); Door Moldings; Molding Kit, Front Side Door
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1989 Cadillac Eldorado | Base, Biarritz | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS
View related parts
Cadillac Eldorado Molding, Driver Side Part Number: 3637206
Product Specifications
- Other Name: Molding Kit, Front Side Door Center Upper (Left-Hand); Door Moldings; Molding Kit, Front Side Door
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1989 Cadillac Eldorado | Base, Biarritz | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS
View related parts
Cadillac Eldorado Molding, Passenger Side Part Number: 3637211
Product Specifications
- Other Name: Molding Kit, Front Side Door Center Upper (Right-Hand); Door Moldings; Molding Kit, Front Side Door
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1991 Cadillac Eldorado | Base, Biarritz, Spring Edition, Touring | 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
View related parts
Cadillac Eldorado Body Side Molding, Driver Side Part Number: 3636979
Product Specifications
- Other Name: Molding, Front Side Door Center *Spring Special; Door Moldings
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Cadillac Eldorado | Base | 8 Cyl 4.6 L GAS
View related parts
Cadillac Eldorado Body Side Molding, Front Driver Side Part Number: 12481870
Product Specifications
- Other Name: Molding, Front Side Door; Door Moldings
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2002 Cadillac Eldorado | ESC, ETC | 8 Cyl 4.6 L GAS
View related parts
Cadillac Eldorado Body Side Molding, Front Driver Side Part Number: 12537865
Product Specifications
- Other Name: Molding, Front Side Door; Door Moldings
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2002 Cadillac Eldorado | Base, ESC, ETC | 8 Cyl 4.6 L GAS
View related parts
Cadillac Eldorado Lower Molding, Front Passenger Side Part Number: 12480843
Product Specifications
- Other Name: Molding Kit, Front Side Door; Door Moldings
- Position: Front Passenger Side
- Replaces: 12372827, 12537432
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2002 Cadillac Eldorado | Base, ESC, ETC | 8 Cyl 4.6 L GAS
View related parts
Cadillac Eldorado Body Side Molding, Front Passenger Side Part Number: 12537864
Product Specifications
- Other Name: Molding, Front Side Door; Door Moldings
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2002 Cadillac Eldorado | Base, ESC, ETC | 8 Cyl 4.6 L GAS
View related parts
Cadillac Eldorado Lower Molding, Front Driver Side Part Number: 12480844
Product Specifications
- Other Name: Molding Kit, Front Side Door; Door Moldings
- Position: Front Driver Side
- Replaces: 12372828, 12537433
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2002 Cadillac Eldorado | Base, ESC, ETC | 8 Cyl 4.6 L GAS
View related parts
Cadillac Eldorado Molding, Front Driver Side Part Number: 20688059
Product Specifications
- Other Name: Molding, Front Door Window Reveal; Door Moldings
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1991 Cadillac Eldorado | Base, Biarritz, Spring Edition, Touring | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
View related parts
Cadillac Eldorado Molding, Front Passenger Side Part Number: 20688058
Product Specifications
- Other Name: Molding, Front Door Window Reveal; Door Moldings
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1991 Cadillac Eldorado | Base, Biarritz, Spring Edition, Touring | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
View related parts
Cadillac Eldorado Window Molding, Driver Side Part Number: 20642243
Product Specifications
- Other Name: Moulding Assembly; Quarter Glass Molding; Molding, Front Door Belt Trim Finish & Window Garnish
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1991 Cadillac Eldorado | Base, Biarritz, Spring Edition, Touring | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
View related parts
Cadillac Eldorado Molding, Front Passenger Side Part Number: 20501718
Product Specifications
- Other Name: Molding Kit, Front Side Door; Door Moldings
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1989 Cadillac Eldorado | Base, Biarritz | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS

| Page 1 of 2 |Next >

1-20 of 35 Results

Cadillac Eldorado Door Moldings

Want to cut long-term maintenance and repair costs? Choose OEM Door Moldings. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Cadillac Eldorado parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Cadillac Eldorado Door Moldings includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Door Moldings are long lasting and high performing parts of the Cadillac that serves both as an ornament and a protector of the stylish and famous Cadillac Eldorado. Most of these door moldings can be made out of some resilient material like the plastic, stainless steel or chrome and play the role of protecting the Cadillac sheet metal from any impacts that may harm it thereby retaining the elegance of the Cadillac Eldorado. The side moldings that are often placed at the center of the doors blend with the Cadillac Eldorado body lines and shapes which adds to the work of art; other styles comprise of door edge moldings and belt moldings which are ornamental as well as protective. These door moldings are adaptable with several models of Eldorado, namely the prestigious Brougham editions to affirm their indispensability traits to bolster the efficiency and safety of the car. In performing their function of being sacrificial parts of the Door Moldings protect the Cadillac and covering its body adding to its reputation for longevity in its constructions. Other aspects that set Eldorado within the automobile sector include rocker panel moldings, as well as completely separate lower door moldings, which makes the advertisements of Cadillac Eldorado appealing to the buyers of luxury cars. Runing from 1952 to 2002, Cadillac Eldorado is a car of luxury and the door moldings plays a role in sustaining the revelered status and excellent performance of the car.

Cadillac Eldorado Door Moldings Parts and Q&A

Body Side Molding, Front Driver Side
12481870
Q: How to replace the door moldings on Cadillac Eldorado?
A:
To substitute the body side molding make sure to have the required tools: Heat Gun (J 25070) and gray double-coated foam tape (3M P/N06380). Start by washing the repair area with Liquid Wash and Wax GM P/N 1052870 to an equal solution, and then dry it out with a cleaner lint-free cloth. Being careful not to scratch the body panel and the back of the molding, eliminate with varnish makers and painters (VM&P) naphtha, or isopropyl alcohol any patches of adhesive residue that remained from the step that was performed just previously. Take masking tape to mark the proper position of the molding by referring the adjoining moldings. Warm the body panel to a minimum of 21°C (70°F) using the Heat Gun, J 25070. Using the gray double-coated foam tape (3M P/N 06380), stick it on the molding, and before installation, close the door. Align the molding from the tape guideline on the body panel, make sure you peel off the backing of the molding on the body panel just before installation and leave it untouched while it is still covered. Separate the two pins on the molding and align them with the two guide holes in the door, fasten the molding to body and apply hand pressure for half a minute down the molding's length to really hold it together on the body. Lastly, take off the masking tape guideline and wipe away any tape residues off the body if so needed.
Body Side Molding, Driver Side
3637172
Q: How to remove the door moldings on Cadillac Eldorado?
A:
To remove the body side molding, you need the following tools: Heat Gun (J 25070), gray double-coated foam tape (3M P/N 06380). Start by cleaning the repair area with Liquid Wash and Wax GM P/N 1052870 or its equivalent, and then dry with a clean lint-free cloth. If there are any adhesive traces on the body panel and the back of the molding, remove them using varnish makers and painters (VM&P) naphtha or isopropyl alcohol. Mask the proper position of the molding with the masking tape; adjacent moldings may be used as their guide. Warm the body panel up to a minimum of 21°C (70°F) by using the Heat Gun (J 25070). Apply the grey double-coated foam tape (3M P/N 06380) to the molding, and close the door before installation. Layout the molding while lining it with the tape guideline placed into the body panel; make sure you pull off the backing from the molding just before installation without it touching the adhesive. Now align the two pins on the molding with the guide holes on the door, fix the molding onto the body & apply hand pressure over it's length for 30 seconds to have a good bond with it. Finally, take off the masking tape guideline and clean any tape traces on the body, if needed.