The first step for changing the shift lever in the automatic transmission is to take off the
Steering Column trim covers. Then, pull the seal back from the shift lever to see the torx(R) head shift lever screw, take out the screw and unplug the shift lever electrical connector. When this is done, take the shift lever out of the Steering Column. When installing, put the shift lever on the Steering Column and attach the shift lever electrical connector. Refer to the fastener notice, put in the torx(R) head shift lever screw and make it tight with 20 n.m or 15 lb ft of torque. When you have finished, cover the torx(R) head shift lever screw with the seal and set the trim covers back on the Steering Column.