Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 26092432
Gear Shift Assembly

1999-2007 GM

Customer Questions & Expert Answers (11)
GM 26092432 Gear Shift Assembly
GM 26092432 Gear Shift Assembly
GM 26092432 Gear Shift Assembly
  • Part Description
    Control Assembly, Automatic Transmission; Shift Lever
  • Replaces
    26056153, 26091248, 26088393, 26088391
  • Manufacturer
    General Motors
Make sure this part fits
$195.07 MSRP: $291.58
You Save: $96.51 (34%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • 26092432 Gear Shift Assembly is Ref No. 15 in the diagram below

    2006 GMC Savana 1500 Gear Shift Assembly Diagram for 26092432
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 26092432

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2004-2005 Chevrolet BlazerBase, LS, Xtreme, ZR26 Cyl 4.3 L GAS
    2003-2007 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2007 Chevrolet Express 2500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2007 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2001-2004 Chevrolet S10Base, LS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26092432 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26092432 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the floor Automatic Transmission Shifter control boot on Chevrolet S10? Posted by Customer
    A:
    When replacing the floor shift control boot begin by removing the retainer (Retainer) that keeps the shift boot connected to the console trim after which you can lightly pry the boot tabs to disconnect the shift boot from the trim. Guidelines for installing the shift boot involve inserting it onto the console trim followed by reinstallation of the retainer (Retainer).
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front Automatic Transmission Shifter with the Tow/Haul Switch on Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    The first step involves removing trim covers before rolling back the shift lever seal to access its torx(r) head screw. After screw removal proceed with the replacement. You should remove the knee bolster and its attached nuts that work with the knee bolster deflector bracket. To remove the Steering Column proceed with removing the wire harness retaining clip to protect the wire harness while disconnecting the wiring harness retaining pin from the instrument panel. To begin the procedure start by opening the harness insulation after detaching the wire straps and disconnect the electrical wires from the connector while also pulling out the shift lever. Shift lever installation begins by attaching the lever followed by connecting its electrical shifter connector. The harness integrating pin should be placed back into the instrument panel while the wire straps get reattached to the harness. Position the knee bolster deflector bracket in place before installing its nuts and when complete tighten them to 9 nm (80 inch lbs.). After that, mount the knee bolster. Secure the torx(r) head shift lever screw at 20 nm (15 ft. Lbs.) torque and then proceed to route the seal over the screw before fastening 2 torx(r) head screws into the lower column trim cover to complete the installation of trim covers.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the floor Automatic Transmission Shifter control boot on GMC Sonoma? Posted by Customer
    A:
    When replacing the floor shift control boot begin by removing the retainer (Retainer) that keeps the shift boot connected to the console trim after which you can lightly pry the boot tabs to disconnect the shift boot from the trim. Guidelines for installing the shift boot involve inserting it onto the console trim followed by reinstallation of the retainer (Retainer).
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done with the shift lever and seal for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Take out the shift lever and seal from the linear shift assembly, ensuring the shift lever seal is removed by sliding it towards the narrow section of the shift lever.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Automatic Transmission Shifter
    Q:
    What should be done after tightening the shift lever screw for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Slide the shift lever seal down the shift lever assembly and align it into the steering column trim covers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Automatic Transmission Shifter
    Q:
    What should be done to access the electrical wiring for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Remove the wire straps and open the harness insulation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Automatic Transmission Shifter
    Q:
    What should be done after placing the shift lever seal for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Install the shift lever assembly to the linear shift assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Automatic Transmission Shifter
    Q:
    What should be done after connecting the shifter electrical connector for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Reattach the wire straps to the harness and install the harness retaining pin to the instrument panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Automatic Transmission Shifter
    Q:
    What is the first step to replace the shift lever in an automatic transmission for the 2003 GMC Savana 3500? Posted by Customer
    A:
    First, disable the SIR system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Automatic Transmission Shifter
    Q:
    How do you install the shift lever seal for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Place the shift lever seal onto the narrow end of the shift lever assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Automatic Transmission Shifter
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Gear Shift Assembly 26092432 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26092432 Gear Shift Assembly is available in the market under the name GM Automatic Transmission Shifter. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26092432 Gear Shift Assembly fits certain Chevrolet S10, Tahoe, Silverado 1500 models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 26092432 maintains top performance when functioning as the Control Assembly, Automatic Transmission; Shift Lever unit. The component 26092432 is constructed from durable material and its dimensions span 6.4 x 6.1 x 5.6 inches while weighing 2.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Lock Assembly; Lever Assembly; Auto Trans Control; Transmission Shift Control Lever.. The part 26092432 has available replacement options 26056153, 26091248, 26088393, 26088391. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.