How to replace the Rack and Pinion Boot on Cadillac Escalade?

Begin boot replacement of the steering gear by removing the outer Tie Rod from steering linkage. Disconnect the steering linkage inner Tie Rod nut from its position on the steering linkage inner Tie Rod. First cut the steering gear boot clamp sections with side cutters before discarding the steering gear boot. Installation starts with the new steering gear boot clamp before applying grease to the steering linkage inner Tie Rod and the steering gear . Place the steering gear boot over the steering linkage inner Tie Rod . Steering gear boots must settle into their correct positions because misalignment or puckering causes issues. Adjust the steering gear boot by hand when needed before positioning it into its housing groove. Set the keystone clamp pliers (J 22610) to crimp the steering gear boot clamp then pin the pliers closed on the boot to install the clamp. Finally tighten the steering gear boot clamp then fit the boot onto the steering gear housing. Reinstall the steering linkage inner Tie Rod nut onto the inner Tie Rod and reinstall the outer Tie Rod before finalizing the installation.

OEM Cadillac Escalade Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Rack and Pinion Boots found

View related parts
Cadillac Escalade Tie Rod Boot
Part Number: 22834081
$36.58 MSRP: $62.28
You Save: $25.70 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Tie Rod End Dust; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit
- Replaced by: 86570735
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2023 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Tie Rod Boot
Part Number: 15254057
$44.28 MSRP: $75.40
You Save: $31.12 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit; Boot Kit, Tie Rod End Dust
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Upper Boot
Part Number: 86803987
$8.78 MSRP: $13.75
You Save: $4.97 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Assembly-Intermediate Steering Shaft; Lower Boot; Boot; Boot, Steering Shaft U Joint
- Replaces: 23317134
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Tie Rod Boot
Part Number: 15895648
$68.29 MSRP: $108.44
You Save: $40.15 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Tie Rod End Dust; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Cadillac Escalade | Hybrid, Hybrid Platinum | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
Cadillac Escalade Tie Rod Boot
Part Number: 26076545
Product Specifications
- Other Name: Boot Kit, Tie Rod End Dust; Power Steering Cylinder Boot; Rack and Pinion Bellows Kit.; Outer Boot; Boot; Boot, Tie Rod End Dust
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Tie Rod Boot
Part Number: 88963416
Product Specifications
- Other Name: Boot Kit, Rear Wheel Steering Actuator; Rack and Pinion Boot; Boot Kit; Boot Kit, Steering
- Position: Rear
- Replaces: 26091589
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2004 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

Cadillac Escalade Rack and Pinion Boot

Our website offers an extensive catalog of genuine Cadillac Escalade Rack and Pinion Boot at unbeatable prices. Every OEM Cadillac Escalade Rack and Pinion Boot comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac Escalade Rack and Pinion Boot Parts Questions & Experts Answers

Tie Rod Boot
15254057
Q: How to replace the Rack and Pinion Boot on Cadillac Escalade?
A: Begin boot replacement of the steering gear by removing the outer Tie Rod from steering linkage. Disconnect the steering linkage inner Tie Rod nut from its position on the steering linkage inner Tie Rod. First cut the steering gear boot clamp sections with side cutters before discarding the steering gear boot. Installation starts with the new steering gear boot clamp before applying grease to the steering linkage inner Tie Rod and the steering gear . Place the steering gear boot over the steering linkage inner Tie Rod . Steering gear boots must settle into their correct positions because misalignment or puckering causes issues. Adjust the steering gear boot by hand when needed before positioning it into its housing groove. Set the keystone clamp pliers (J 22610) to crimp the steering gear boot clamp then pin the pliers closed on the boot to install the clamp. Finally tighten the steering gear boot clamp then fit the boot onto the steering gear housing. Reinstall the steering linkage inner Tie Rod nut onto the inner Tie Rod and reinstall the outer Tie Rod before finalizing the installation.