Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2008-2009 Cadillac SRX | Base | 8 Cyl 4.6 L GAS
Cadillac SRX Exhaust Pipe
Our website offers an extensive catalog of genuine Cadillac SRX Exhaust Pipe at unbeatable prices. Every OEM Cadillac SRX Exhaust Pipe comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Cadillac SRX Exhaust Pipe Parts Questions & Experts Answers
Q: How to Service and Repair an Exhaust Pipe on Cadillac SRX?
A: The replacement process for the exhaust Tail Pipe extension starts by lifting up and supporting the vehicle. Start by removing the exhaust system from both its positions at the rear suspension hanger rods and the Tail Pipe hanger rods. Use the tip marker to note the current location of the exhaust tip on the Exhaust Pipe before you remove top and bottom welds as well as the exhaust tip itself. Weld removal must take place on all remaining parts of the Exhaust Pipe. Install the new exhaust tip to the Exhaust Pipe using the same position as the original placement mark before disassembly. Re-attach the exhaust system to its positions on the rear suspension hanger rods followed by the Tail Pipe hanger rods with visual reference to the exhaust tip alignment on the vehicle. Weld the exhaust tip only in specific positions and remove the exhaust system from the rear suspension hanger rods and the Tail Pipe hanger rods. Finally you should weld the exhaust tip to the Exhaust Pipe at the same points where the original piece was welded before reinstalling the exhaust system to both rear suspension hanger rods and Tail Pipe hanger rods.