In order to replace the
Spark Plug wires at first one should disconnect a Spark Plug wire on each Spark Plug by twisting the boots a 1/2 turn before removal be sure to only pull on the boot or use a tool specifically designed for the task. Next, come off the Spark Plug wire from the
Distributor. You twist the boot up 1 1/2 turn and only pull on the boot or use a tool. In the installation process, see that the boots are seated nicely by pushing them sideways as incorrect seating will result in wire core erosion, misfire engine, and interior damage. Mount the Spark Plug wires on the Distributor and then on each Spark Plug. Push sideways on each boot to examine for proper seating, reinstall any loose boots installed, and maintain proper wire routings to minimize radio ignition noise, crossfiring or shorting to ground. In addition, lubricate the new dielectric grease at the boot, which are used to cover Spark Plug wires or boots placed on the spark plugs.