OEM Chevrolet Avalanche 1500 Automatic Transmission Shift Levers

Automatic Transmission Shifter
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Automatic Transmission Shift Levers found

  • Chevy Avalanche 1500 Automatic Transmission Shift Levers - 26075107
    Chevy Avalanche 1500 Automatic Transmission Shift Levers Diagram - 26075107
    View related parts

    Chevrolet Avalanche 1500 Shift Lever

    Part Number: 26075107
    $143.69 MSRP: $186.89
    You Save: $43.20 (24%)
    ADD TO CART
    Product Specifications
    • Other Name: Lever Assembly, Automatic Transmission Control; Select Switch; Lever, Transmission Gear Shift Control; Lever, Transmission Control Lever
    • Replaces: 15047818, 26097218, 15038407
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2002-2006 Chevrolet Avalanche 1500 | Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

Chevrolet Avalanche 1500 Automatic Transmission Shift Levers

Our website offers an extensive catalog of genuine Chevrolet Avalanche 1500 Automatic Transmission Shift Levers at unbeatable prices. Every OEM Chevrolet Avalanche 1500 Automatic Transmission Shift Levers comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Avalanche 1500 Automatic Transmission Shift Levers Parts Questions & Experts Answers

  • Q: How to replace the Automatic Transmission Shift Levers with a Tow/Haul switch on Chevrolet Avalanche 1500?
    A: The first step of this installation requires users to remove two torx head screws from the lower column trim cover before taking away the cover itself. Remove the shift lever screw with torx® head by rolling back the seal at its base. Remove the knee bolster together with its attached nuts from the knee bolster deflector bracket. The removal process of the steering column requires separating and restoring the wire harness retaining clip to protect the harness from damage. The instrument panel needs a wiring harness retaining pin to be taken out so the wire straps can be removed followed by opening the harness insulation to reach electrical wiring. The wiring needs to be detached from the electrical connector before taking out the shift lever. Begin installing operations by first putting in the shift lever followed by attaching the shifter electrical connector. Attach wire straps back to the harness system then add the harness retaining pin to its panel installation spot. The knee bolster receives both deflector bracket and nuts for installation before being tightened at 9 nm (80 inch lbs.) before installation completes. Fasten the torx head shift lever screw with 20 nm torque while rolling the seal over the screw before putting back the lower column trim cover with its 2 torx head screws tightened to 3.5 nm (31 inch lbs.).

Related Chevrolet Avalanche 1500 Parts