How to replace the Body Control Module (BCM) on Chevrolet Avalanche 1500?

Before replacing the Body Control Module you need to disconnect the negative battery cables according to the battery disconnect caution. Unplug the brown connector and all other connectors from the knee bolster after you remove it. Pull the bcm out from its sliding bracket position. Insert the bcm onto its bracket and plug all connectors but not the brown one. Finally attach the brown connector. Put back the knee bolster and reconnect both battery leads. Connect all links and wire in the bcm. Then reprogram the system and run through the passlock learn steps to finalize setup.

OEM Chevrolet Avalanche 1500 Body Control Module

BCM

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Body Control Module found

View related parts
Chevrolet Avalanche 1500 Module
Part Number: 15187264
Product Specifications
- Other Name: Module, Theft Deterrent Or Front/Rear/Side Object; Module,Theft Deterrent Or Front/Rear/Side/Intake Object
- Position: Rear
- Replaces: 15068175
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche 1500 | Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

Chevrolet Avalanche 1500 Body Control Module

Our website offers an extensive catalog of genuine Chevrolet Avalanche 1500 Body Control Module at unbeatable prices. Every OEM Chevrolet Avalanche 1500 Body Control Module comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Avalanche 1500 Body Control Module Parts Questions & Experts Answers

Module
15187264
Q: How to replace the Body Control Module (BCM) on Chevrolet Avalanche 1500?
A: Before replacing the Body Control Module you need to disconnect the negative Battery Cables according to the battery disconnect caution. Unplug the brown connector and all other connectors from the knee bolster after you remove it. Pull the bcm out from its sliding bracket position. Insert the bcm onto its bracket and plug all connectors but not the brown one. Finally attach the brown connector. Put back the knee bolster and reconnect both battery leads. Connect all links and wire in the bcm. Then reprogram the system and run through the passlock learn steps to finalize setup.