How to replace the Crankshaft Position Sensor on Chevrolet Avalanche 1500?

Start your crankshaft position (CKP) sensor replacement by taking out the Starter followed by removing the ckp sensor electrical connector. Wipe down the environment surrounding the ckp sensor before removing its bolt and sensor. Reposition the ckp sensor in its original place then install the ckp sensor bolt using a torque of 25 n.m (18 lb ft). Finish the Starter installation after reattaching the ckp sensor electrical connector. A ckp system variation learn procedure must be completed after removing or replacing the Crankshaft Position Sensor.

OEM Chevrolet Avalanche 1500 Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
Chevrolet Avalanche 1500 Crankshaft Position Sensor
Part Number: 12560228
$65.79 MSRP: $117.48
You Save: $51.69 (44%)
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 12555566
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche 1500 | Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

Chevrolet Avalanche 1500 Crankshaft Position Sensor

Our website offers an extensive catalog of genuine Chevrolet Avalanche 1500 Crankshaft Position Sensor at unbeatable prices. Every OEM Chevrolet Avalanche 1500 Crankshaft Position Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Avalanche 1500 Crankshaft Position Sensor Parts Questions & Experts Answers

Crankshaft Position Sensor
12560228
Q: How to replace the Crankshaft Position Sensor on Chevrolet Avalanche 1500?
A: Start your crankshaft position (CKP) sensor replacement by taking out the Starter followed by removing the ckp sensor electrical connector. Wipe down the environment surrounding the ckp sensor before removing its bolt and sensor. Reposition the ckp sensor in its original place then install the ckp sensor bolt using a torque of 25 n.m (18 lb ft). Finish the Starter installation after reattaching the ckp sensor electrical connector. A ckp system variation learn procedure must be completed after removing or replacing the Crankshaft Position Sensor.

Related Chevrolet Avalanche 1500 Parts

Browse Chevrolet Avalanche 1500 Crankshaft Position Sensor by Years

2006 2005 2004 2003 2002