Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15187264
Module

2001-2006 GM

Customer Questions & Expert Answers (9)
GM 15187264 Module
GM 15187264 Module
GM 15187264 Module
GM 15187264 Module
GM 15187264 Module
  • Part Description
    Module, Theft Deterrent Or Front/Rear/Side Object
  • Position
    Rear
  • Replaces
    15068175
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 2006 GMC Yukon Module Diagram for 15187264
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15187264

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2006 Chevrolet Suburban 1500Base, LS, LT, LTZ, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2001-2006 Chevrolet Suburban 2500Base, LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2002-2006 Chevrolet TahoeBase, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 GMC YukonDenali, SL, SLE, SLT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2001-2006 GMC Yukon XL 1500Denali, SL, SLE, SLT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15187264 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15187264 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Body Control Module (BCM) on Cadillac Escalade EXT? Posted by Customer
    A:
    Before replacing the Body Control Module you need to disconnect the negative battery cables according to the battery disconnect caution. Unplug the brown connector and all other connectors from the knee bolster after you remove it. Pull the bcm out from its sliding bracket position. Insert the bcm onto its bracket and plug all connectors but not the brown one. Finally attach the brown connector. Put back the knee bolster and reconnect both battery leads. Connect all links and wire in the bcm. Then reprogram the system and run through the passlock learn steps to finalize setup.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Body Control Module (BCM) on Chevrolet Avalanche 1500? Posted by Customer
    A:
    Before replacing the Body Control Module you need to disconnect the negative battery cables according to the battery disconnect caution. Unplug the brown connector and all other connectors from the knee bolster after you remove it. Pull the bcm out from its sliding bracket position. Insert the bcm onto its bracket and plug all connectors but not the brown one. Finally attach the brown connector. Put back the knee bolster and reconnect both battery leads. Connect all links and wire in the bcm. Then reprogram the system and run through the passlock learn steps to finalize setup.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Body Control Module (BCM) on Chevrolet Avalanche 2500? Posted by Customer
    A:
    Beginning BCM replacements requires disconnecting the negative battery cables after following the specified procedure for Battery Disconnect Caution. The next step involves removing the knee bolster and disconnecting the brown connector along with every other connector attached. Once the BCM is free from the sliding bracket you can proceed with removal. During installation slide the BCM onto the bracket first and establish all connector connections except the brown one before connecting the brown connector. Put back the knee bolster and complete the battery cable reconnection. Reprogramming the BCM alongside Passlock Learn Procedure completes the process sequence.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to remove and replace the Body Control Module (BCM) on Chevrolet Suburban 2500? Posted by Customer
    A:
    Disconnection of the negative battery cables must come first followed by the knee bolster's removal. Unplug all connectors including the brown one before taking out the bcm from its position on the sliding bracket. Place the bcm on the bracket then join all its connectors except the brown one which goes in last. Put in the knee bolster and complete the bcm repair steps with negative cable connections.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to remove and install the Body Control Module (BCM) on Chevrolet Suburban 1500? Posted by Customer
    A:
    Begin bcm removal work by disconnecting the negative battery source and then pulling out the knee bolster. Follow the brown connector by detaching all other connectors and then take the bcm off its sliding bracket. Place the bcm onto the bracket and join connectors except for the brown one leaving it for last connection. Replace the knee bolster and then recharge the battery cables before programming the bcm when necessary.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to remove and install the Body Control Module (BCM) on GMC Yukon XL 1500? Posted by Customer
    A:
    Begin bcm removal work by disconnecting the negative battery source and then pulling out the knee bolster. Follow the brown connector by detaching all other connectors and then take the bcm off its sliding bracket. Place the bcm onto the bracket and join connectors except for the brown one leaving it for last connection. Replace the knee bolster and then recharge the battery cables before programming the bcm when necessary.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Body Control Module (BCM) on GMC Yukon? Posted by Customer
    A:
    Before replacing the Body Control Module you need to disconnect the negative battery cables according to the battery disconnect caution. Unplug the brown connector and all other connectors from the knee bolster after you remove it. Pull the bcm out from its sliding bracket position. Insert the bcm onto its bracket and plug all connectors but not the brown one. Finally attach the brown connector. Put back the knee bolster and reconnect both battery leads. Connect all links and wire in the bcm. Then reprogram the system and run through the passlock learn steps to finalize setup.
    Posted by ChevyPartsGiant Specialist
    Q:
    What needs to be disconnected along with all other connectors for the 2003 Cadillac Escalade? Posted by Customer
    A:
    The brown connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Body Control Module
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Module 15187264 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15187264 Module is available in the market under the name GM Body Control Module. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15187264 Module fits certain Chevrolet Tahoe, Suburban 1500, Avalanche 1500 models, as well as GMC Yukon, Yukon XL 1500, Yukon XL 2500. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 15187264 maintains top performance when functioning as the Module, Theft Deterrent Or Front/Rear/Side Object unit at its Rear. The component 15187264 is constructed from durable material and its dimensions span 5.9 x 5.6 x 3.3 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Module,Theft Deterrent Or Front/Rear/Side/Intake Object. The part 15187264 has available replacement options 15068175. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.