How to Service and Repair the Clutch Fork on Chevrolet Aveo?

To replace the Clutch Fork, to start with, one is required to note where it situates with reference to the release shaft situation. Unscrew the adjusting nut for the Clutch Cable then replace the clutch control cable from the fork. Then we can take out the Clutch Fork retaining bolt and nut prior to removing the fork. For installation, align the fork to the marked position on the release shaft and tighten the fork bolt and nut to 16 nm (12 ft. Lbs.). After that, reconnect the clutch control cable to the fork, and install the clutch control cable adjusting nut. Finally, set the Clutch Cable as required.

OEM Chevrolet Aveo Clutch Fork

Release Fork

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clutch Fork found

View related parts
Chevrolet Aveo Release Fork
Part Number: 94580796
$17.53 MSRP: $27.45
You Save: $9.92 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fork, Engine Clutch Release; Clutch Fork
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2011 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

Chevrolet Aveo Clutch Fork

Our website offers an extensive catalog of genuine Chevrolet Aveo Clutch Fork at unbeatable prices. Every OEM Chevrolet Aveo Clutch Fork comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Aveo Clutch Fork Parts Questions & Experts Answers

Release Fork
94580796
Q: How to Service and Repair the Clutch Fork on Chevrolet Aveo?
A: To replace the Clutch Fork, to start with, one is required to note where it situates with reference to the release shaft situation. Unscrew the adjusting nut for the Clutch Cable then replace the clutch control cable from the fork. Then we can take out the Clutch Fork retaining bolt and nut prior to removing the fork. For installation, align the fork to the marked position on the release shaft and tighten the fork bolt and nut to 16 nm (12 ft. Lbs.). After that, reconnect the clutch control cable to the fork, and install the clutch control cable adjusting nut. Finally, set the Clutch Cable as required.