OEM Chevrolet Aveo Release Bearing

Chevrolet Aveo Release Bearing Parts Questions & Experts Answers

• Release Bearing
  90278884
  Q: How to Service and Inspect the Release Bearing on Chevrolet Aveo?

  A: The procedure begins with transaxle removal followed by release arm along with the Release Bearing removal from the vehicle. Use dt 47514 (DW210-040) together with a hammer to remove the no. 2 bushing and seal while you use dt 47514 (DW210-040) and a hammer to remove the no. 2 bushing and seal. Pass the tap (M16 x 1.51) through the bushing after you have pulled out the release shaft. Use j 2619-01 09930-30102 with the end of dt 47513 dw210-030 for drawing out the bushing through pulling action. Check for noise, wear or damage on the Release Bearing and evaluate the shaft for warping and fork wear before making necessary replacements of parts. Use dt 47513 with 09943-88211 and a hammer tool to install release shaft no. 1 bushing followed by the release shaft itself while applying grease to both the bushing and release shaft. Prior to Release Bearing installation, apply multipurpose grease over the spline of transaxle input shaft and Release Bearing bore. Use the combination of dt 47514 (DW210-040) and a hammer to install both the release shaft no. 2 bushing and its attached seal. After installation the transaxle should be mounted back into the vehicle.