In order to replace
Ignition Switch lock cylinder, first disconnect the negative
Battery Cable. Take out the screws 6, 7 and 8 and remove the lower steering column cover panel. Then you should remove the
Steering Wheel and then the screws (1, 2) then cut off the key reminder switch with its connector. To remove the Ignition Switch lock cylinder, the key should be placed to acc position by the aid of 2.5 allen wrench, by pressing the detent spring. Then, the Ignition Switch lock cylinder should be removed. To remove the Ignition Switch turn aside the Ignition Switch screw, take off the Ignition Switch, and deconnect the conector. Remove the key hole illumination screw, take out the key hole illumination, disconnect its connector. For the installation, begin with the key hole illumination, which includes installing it, tightening it with a screw, and connecting its connector. Then, install the Ignition Switch and fix it with screw and connect to its connector. Install the Ignition Switch lock cylinder and take away the key. Then, install the key reminder switch, fix it using screws (1, 2), and link its connector. Lastly, install the Steering Wheel, the lower steering column cover panel, and the screws (6, 7, 8) and connect the negative Battery Cable back.