OEM Chevrolet Aveo TPMS Sensor

Chevrolet Aveo TPMS Sensor Parts Questions & Experts Answers

• TPMS Sensor, Black
  13540600
  Q: How to replace the TPMS Sensor on Chevrolet Aveo?

  A: Start by elevating the vehicle before supporting it. First separate the wheel assembly from the tire before pulling the tire down from the wheel. The installation process begins with torx screw removal followed by enclosure removal from the valve along with the cutting of the rubber bulb from the valve stem. Use the tire valve stem mounting tool to guide the valve stem through the rim opening. Begin by holding the valve stem bare of its core to mount the new tire pressure sensor snap-in enclosure. Then fasten it with a torx screw until you notice the valve stem rotating. Add gm goodwrench rubber lubricant gm p/n 12345884 (Canadian P/N 5728223) to both the valve stem rubber section and the enclosure top surface. Apply sensor alignment with the wheel valve stem hole while maintaining parallel position between the valve stem and sensor and the valve hole axis. Check for proper alignment between the valve rubber bulb and wheel rim surface then ensure the sensor front face stays away from the wheel rim. Mount both the tire onto its designated wheel before reattaching the wheel and tire combination to the vehicle. Configure the tire pressure monitor system after lowering the vehicle to its correct position.