To replace the lower filler tube, drain all the fuel from the Fuel Tank and ensure the lower fuel fill hose is removed and underbody mounted spare tire is taken down. Release the upper fuel fill hose clamp, and remove the ground wire from the frame crossover, removing retaining straps from the lower fuel fill tube. Next, remove the lower fuel fill tube retaining bolt at the x- overs between the frame, and disconnect the lower fuel fill tube from the upper fuel fill hose before removing the fuel-fill tube. To install, align the fuel fill tube over the frame crossover and attach both of the upper and lower fuel fill hoses to the tube. Mount the lower fuel fill tube retaining bolt to frame crossover and torque 15 n.m (11 lb ft). Join the ground wire back to the fhame x over switch tightening the ground strap retaining screw to 15nm (11lb ft) and attach the ground wire to the lower fuel fill tube with new retainer straps . Mount the hose clamps ( 2, 7 ) onto upper and lower fuel fill hose and tighten to 2.5n.m ( 22 lb in ). Lastly, reinstall the spare tire, bring the vehicle down, and remove the fuel fill cap to top off the Fuel Tank, install the fuel fill cap back, and connect the negative cable of the battery.