How to replace the engine flywheel on Chevrolet Blazer?

Start the replacement of an engine Flywheel by taking away both the transmission and clutch assembly if present. First take out the engine Flywheel bolts followed by the removal of the engine Flywheel according to transmission type: automatic or manual. Replacement of manual transmission engine flywheels must install new weighing plates at their original positions and requires documentation of their positions before assembly begins. Every component requires cleaning followed by inspection before beginning with the installation process. Note the positioning and lengths of original Flywheel weights before installing a new engine Flywheel by replacing the weights of equal length in identical position locations. The installed new Flywheel weights need to rest at either a level position or lower than the engine Flywheel surface. Fit the engine Flywheel against the Crankshaft while positioning the locator hole next to the locator pin and follow by tightening engine Flywheel bolts to 100 nm (74 ft. Lbs) torque using an installed sequence. The final step should involve the reinstallation of clutch assemblies then transmission units.

OEM Chevrolet Blazer Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Flywheels found

View related parts
Chevrolet Blazer Drive Plate Part Number: 14088761
$146.61 MSRP: $230.69
You Save: $84.08 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel; Flywheel, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1988 Chevrolet Blazer | Custom Deluxe, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Blazer Flywheel Part Number: 12557586
$372.76 MSRP: $536.04
You Save: $163.28 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Flywheel Part Number: 15705364
$545.45 MSRP: $819.00
You Save: $273.55 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
- Replaces: 15967783, 15986800
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Chevrolet Blazer | Base, Silverado, Silverado Sport | 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Drive Plate Part Number: 14077158
$169.70 MSRP: $251.92
You Save: $82.22 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft; Flywheel
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1991 Chevrolet Blazer | Custom Deluxe, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL
View related parts
Chevrolet Blazer Drive Plate Part Number: 14077157
$159.90 MSRP: $251.60
You Save: $91.70 (37%)
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994, 1987-1990 Chevrolet Blazer | Base, Custom Deluxe, Scottsdale, Silverado, Silverado Sport | 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Drive Plate Part Number: 14088648
Product Specifications
- Other Name: Flywheel, Engine Crankshaft; Flywheel
- Replaces: 10105832
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1994 Chevrolet Blazer | Base, Cheyenne, Custom Deluxe, Scottsdale, Silverado, Silverado Sport | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Blazer Drive Plate Part Number: 12554824
Product Specifications
- Other Name: Flywheel, Engine Crankshaft; Flywheel
- Replaces: 14088767
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Blazer Drive Plate Part Number: 12557587
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Flywheel Part Number: 14103282
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Blazer | Base, LS, LT, Trailblazer | 6 Cyl 4.3 L GAS

Chevrolet Blazer Flywheel

Want to cut long-term maintenance and repair costs? Choose OEM Flywheel. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Blazer parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Blazer Flywheel includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Blazer Flywheel Parts and Q&A

Flywheel
12557586
Q: How to replace the engine flywheel on Chevrolet Blazer?
A:
Start the replacement of an engine Flywheel by taking away both the transmission and clutch assembly if present. First take out the engine Flywheel bolts followed by the removal of the engine Flywheel according to transmission type: automatic or manual. Replacement of manual transmission engine flywheels must install new weighing plates at their original positions and requires documentation of their positions before assembly begins. Every component requires cleaning followed by inspection before beginning with the installation process. Note the positioning and lengths of original Flywheel weights before installing a new engine Flywheel by replacing the weights of equal length in identical position locations. The installed new Flywheel weights need to rest at either a level position or lower than the engine Flywheel surface. Fit the engine Flywheel against the Crankshaft while positioning the locator hole next to the locator pin and follow by tightening engine Flywheel bolts to 100 nm (74 ft. Lbs) torque using an installed sequence. The final step should involve the reinstallation of clutch assemblies then transmission units.