How to replace the Engine Oil Cooler Hose/Pipe on a 4WD on Chevrolet Blazer?

The first step for engine Oil Cooler Hose/pipe replacement on 4wd vehicles includes lifting the vehicle. First separate the front skid plate bolt while removing the front skid plate. Put a drain pan under the engine oil before you take off the bolt holding the remote oil filter adapter and dispose of the seals. First lower the vehicle so you can remove the air cleaner assembly. The engine oil cooler lines require detachment from the Radiator before removing them completely from the vehicle. Examine each component of fittings, connectors, cooler lines, cooler, filter lines and remote filter adapter for damage and distortion alongside restrictions and replace faulty components when needed. Engine oil of the same type normally used for circulation should be used to clean the engine oil cooler along with its lines and both the remote filter adapter and connecting filter lines. Installation requires new seals placement on both engine oil cooler line ends followed by using a torque wrench to install and tighten the mounting bolt at the remote oil filter adapter to 35 nm (26 ft. Lbs.). Install the engine oil cooler mounting bolt to the engine while tightening it to 35 nm (26 ft. Lbs.). After installing new retaining rings secure the engine oil cooler lines to the Radiator while maintaining proper connection through line tension. After installation of the front skid plate attach its bolts with 32 nm (24 ft. Lbs.) torque setting then return the vehicle to normal height for final inspection before filling the engine oil to necessary capacity.

OEM Chevrolet Blazer Oil Cooler Hose

Oil Cooler Line

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

27 Oil Cooler Hoses found

View related parts
Chevrolet Blazer Inlet Hose
Part Number: 12472281
$35.67 MSRP: $61.24
You Save: $25.57 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Oil Cooler Inlet; Oil Cooler Hose; Oil Cooler Pipe; Hose; Hose, Engine Oil Cooler
- Replaces: 15687137
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Chevrolet Blazer | Base, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Outlet Hose
Part Number: 12472282
$42.75 MSRP: $70.43
You Save: $27.68 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Oil Cooler; Oil Cooler Hose; Oil Cooler Pipe; Hose
- Replaces: 15687142
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Chevrolet Blazer | Base, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Oil Cooler Pipe
Part Number: 23100571
$7.67 MSRP: $12.62
You Save: $4.95 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Transmission Fluid Cooler Inlet; Line; Pipe, Transmission Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Blazer | Base, LT, Premier, RS | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Inlet Hose
Part Number: 12472295
$39.92 MSRP: $65.75
You Save: $25.83 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Oil Cooler; Oil Cooler Hose; Hose
- Replaces: 15696729
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Chevrolet Blazer | Cheyenne, Silverado | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Blazer Hose
Part Number: 12472296
$46.01 MSRP: $79.02
You Save: $33.01 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Engine Oil Cooler Outlet; Oil Cooler Hose; Hose, Engine Oil Cooler
- Replaces: 15696730
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Chevrolet Blazer | Cheyenne, Silverado | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Blazer Outlet Pipe
Part Number: 84964982
$50.32 MSRP: $78.80
You Save: $28.48 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler; Transmission Oil Cooler Line; Hose & Tube Assembly; Line
- Replaced by: 85069329
- Replaces: 84663281, 84917317
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Blazer | LT, Premier, RS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Blazer Outlet Pipe
Part Number: 55510923
$45.68 MSRP: $71.57
You Save: $25.89 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Coolant Outlet; Oil Cooler Line; Hoses; Hose, Engine Oil Cooler
- Replaces: 55504787
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Blazer | LT, Premier, RS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Blazer Outlet Hose
Part Number: 24278345
$4.94 MSRP: $7.73
You Save: $2.79 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Automatic Transmission Fluid Cooling Heat Exchanger In; Transmission Oil Cooler Line; Oil Cooler Hose; Hose, Transmission Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Blazer | LT, Premier, RS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Blazer Connector Hose
Part Number: 24295870
$12.62 MSRP: $19.77
You Save: $7.15 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Automatic Transmission Fluid Cooling Heat Exchanger; Transmission Oil Cooler Line; Inlet Hose; Hose, Transmission Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Blazer | LT, Premier, RS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Blazer Inlet Hose
Part Number: 55487351
$33.77 MSRP: $53.58
You Save: $19.81 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Coolant Inlet; Oil Cooler Hose; Hose, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Blazer | LT, Premier, RS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Blazer Outlet Hose
Part Number: 15953703
$35.24 MSRP: $57.68
You Save: $22.44 (39%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Outlet; Oil Cooler Hose; Hose; Hose, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Blazer | Base, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Inlet Pipe
Part Number: 84132343
$30.87 MSRP: $50.85
You Save: $19.98 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Transmission Fluid Auxiliary Cooler Inlet; Inlet Hose; Oil Feed Tube; Line; Pipe, Transmission Oil Cooler
- Replaces: 23119935
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Blazer | Base, LT, Premier, RS | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Oil Cooler Hose
Part Number: 15194577
$109.67 MSRP: $180.66
You Save: $70.99 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler; Inlet Hose; Hose; Hose, Engine Oil Cooler
- Replaces: 15730170, 15757070
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Outlet Hose
Part Number: 84389088
$55.99 MSRP: $88.86
You Save: $32.87 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler; Transmission Oil Cooler Line; Hose & Tube Assembly; Oil Outlet Tube; Line
- Replaced by: 86584621
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Blazer | Base, LT, Premier, RS | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Inlet Hose
Part Number: 84211763
$51.51 MSRP: $84.82
You Save: $33.31 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Transmission Fluid Cooler Inlet; Transmission Oil Cooler Hose; Transmission Oil Cooler Line; Outlet Hose; Oil Inlet Tube; Hose & Tube Assembly; Line; Pipe, Transmission Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Blazer | Base, LT, Premier, RS | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Hose
Part Number: 12472199
Product Specifications
- Other Name: Hose, Engine Oil Cooler
- Replaces: 15548901
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1991 Chevrolet Blazer | Custom Deluxe, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL
View related parts
Chevrolet Blazer Hose
Part Number: 12472200
Product Specifications
- Other Name: Hose Assembly, Engine Oil Cooler Outlet; Hose, Engine Oil Cooler
- Replaces: 15548902
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1991 Chevrolet Blazer | Custom Deluxe, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL
View related parts
Chevrolet Blazer Hose
Part Number: 12472196
Product Specifications
- Other Name: Hose Assembly, Engine Oil Cooler Outlet; Oil Cooler Hose; Hose, Engine Oil Cooler
- Replaces: 14055584
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1991 Chevrolet Blazer | Custom Deluxe, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Blazer Hose
Part Number: 12472195
Product Specifications
- Other Name: Hose, Engine Oil Cooler; Oil Cooler Hose
- Replaces: 14055583
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1991 Chevrolet Blazer | Custom Deluxe, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Blazer Hose
Part Number: 15982251
Product Specifications
- Other Name: Hose, Oil Filter Inlet & Outlet; Oil Cooler Hose; Hose, Engine Oil Filter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Blazer | Base, LT | 6 Cyl 4.3 L GAS

| Page 1 of 2 |Next >

1-20 of 27 Results

Chevrolet Blazer Oil Cooler Hose

Our website offers an extensive catalog of genuine Chevrolet Blazer Oil Cooler Hose at unbeatable prices. Every OEM Chevrolet Blazer Oil Cooler Hose comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Blazer Oil Cooler Hose Parts Questions & Experts Answers

Hose
15194579
Q: How to replace the Engine Oil Cooler Hose/Pipe on a 4WD on Chevrolet Blazer?
A: The first step for engine Oil Cooler Hose/pipe replacement on 4wd vehicles includes lifting the vehicle. First separate the front skid plate bolt while removing the front skid plate. Put a drain pan under the engine oil before you take off the bolt holding the remote oil filter adapter and dispose of the seals. First lower the vehicle so you can remove the air cleaner assembly. The engine oil cooler lines require detachment from the Radiator before removing them completely from the vehicle. Examine each component of fittings, connectors, cooler lines, cooler, filter lines and remote filter adapter for damage and distortion alongside restrictions and replace faulty components when needed. Engine oil of the same type normally used for circulation should be used to clean the engine oil cooler along with its lines and both the remote filter adapter and connecting filter lines. Installation requires new seals placement on both engine oil cooler line ends followed by using a torque wrench to install and tighten the mounting bolt at the remote oil filter adapter to 35 nm (26 ft. Lbs.). Install the engine oil cooler mounting bolt to the engine while tightening it to 35 nm (26 ft. Lbs.). After installing new retaining rings secure the engine oil cooler lines to the Radiator while maintaining proper connection through line tension. After installation of the front skid plate attach its bolts with 32 nm (24 ft. Lbs.) torque setting then return the vehicle to normal height for final inspection before filling the engine oil to necessary capacity.