Other Name: Absorber Kit, Front Shock; Suspension Shock Absorber; Shock; Absorber Kit, Front And Rear Suspension
Position: Front
Replaces: 22152120
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2004-2005, 2002, 1999 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
| Page 1 of 3 |Next >
1-20 of 43 Results
Chevrolet Blazer Shock Absorber
Our website offers an extensive catalog of genuine Chevrolet Blazer Shock Absorber at unbeatable prices. Every OEM Chevrolet Blazer Shock Absorber comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Blazer Shock Absorber Parts Questions & Experts Answers
Q: How to replace the shock absorber on Chevrolet Blazer?
A: Vehicle Shock Absorber replacement begins when you properly elevate and support the vehicle followed by supporting the rear axle. The automatic level control air lines need disconnecting from the Shock Absorber when it is available. After removing upper mounting bolts and lower mounting nut of the Shock Absorber service personnel should remove the lower mounting bolt specifically for four-door utilities before removing the Shock Absorber from the vehicle. After placing the Shock Absorber inside the vehicle you should install the specific lower mounting bolt for four-door utilities. Screw the upper mounting bolts of the Shock Absorber to 25 nm (18 ft. Lbs.) torque and thread the lower mounting nut to 84 nm (62 ft. Lbs.) on 2-door utility vehicles while tightening the lower mounting bolts to 100 nm (74 ft. Lbs.) on 4-door utility vehicles. If the vehicle has automatic level control the air line needs to be connected to the Shock Absorber before removing the rear axle support and conducting lower vehicle operations.