How to replace the steering knuckle in a coil spring suspension system on Chevrolet Blazer?

The coil spring suspension replacement of a Steering Knuckle requires first lifting and supporting the vehicle and then removing the tire followed by the wheel. A suitable jack should be used to support the lower Control Arm during Wheel Hub and bearing removal. First disconnect the electronic suspension control (ESC) link rod from its sensor before detaching the outer tie rod from the knuckle. First remove the brake hose bracket retaining bolt from the knuckle and then use j 43631 Ball Joint remover with j 45851 Ball Joint separator protector adapters to remove the upper retaining nut which isolates the upper Ball Joint from the Steering Knuckle followed by removing the lower Ball Joint. The mechanic should remove the Steering Knuckle followed by a cleaning step which removes contaminants from the upper and lower ball joints as well as the Tie Rod End while checking the tapered areas of the knuckle. Steering knuckles must be replaced when tapered holes show signs of elongation or out-of-roundness or damage. Lay the Steering Knuckle into position then attach the lower Ball Joint next and finish with the retaining nut tightened to 100 nm (74 ft. Lbs.). The upper Ball Joint requires installation on the Steering Knuckle before implementing its retaining nut which should get tightened to 50 nm (37 ft. Lbs.). The brake hose bracket retaining bolt fits onto the knuckle and receives a torque of 9 nm (80 inch lbs.). Now secure the outer tie rod into position on the Steering Knuckle and the Wheel Hub and bearing assembly. Attach esc link rod to sensor before installing tire and wheel and removing vehicle stands before lowering the car.

OEM Chevrolet Blazer Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

20 Steering Knuckles found

View related parts
Chevrolet Blazer Knuckle, Passenger Side
Part Number: 18060560
$260.72 MSRP: $407.39
You Save: $146.67 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 15730620
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Knuckle, Passenger Side
Part Number: 84560118
$81.76 MSRP: $128.03
You Save: $46.27 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 84437329
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Blazer | Base, L, LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Knuckle, Rear Passenger Side
Part Number: 84943319
$102.89 MSRP: $161.14
You Save: $58.25 (37%)
ADD TO CART
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Passenger Side
- Replaced by: 85024987
- Replaces: 42443819
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Blazer | Base, L, LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Knuckle, Driver Side
Part Number: 84560117
$81.76 MSRP: $128.03
You Save: $46.27 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 84437330
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Blazer | Base, L, LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Knuckle, Rear Driver Side
Part Number: 84943318
$102.89 MSRP: $161.14
You Save: $58.25 (37%)
ADD TO CART
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Driver Side
- Replaced by: 85024986
- Replaces: 42443818
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Blazer | Base, L, LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Knuckle, Driver Side
Part Number: 18060569
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 15975273
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Knuckle, Passenger Side
Part Number: 15684320
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Blazer | Base, LS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Knuckle, Passenger Side
Part Number: 18060572
Product Specifications
- Other Name: Knuckle Assembly, Steering; Knuckle, Steering
- Position: Passenger Side
- Replaces: 15981174
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Knuckle, Passenger Side
Part Number: 18060570
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 15975274
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Knuckle, Passenger Side
Part Number: 18060558
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaced by: 15294230
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Knuckle, Passenger Side
Part Number: 18060568
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 15975272
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Knuckle, Driver Side
Part Number: 15294229
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 15704493, 18060557
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Knuckle, Driver Side
Part Number: 18060567
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 15975271
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Knuckle
Part Number: 15739982
Product Specifications
- Other Name: Knuckle Assembly-Steering; Knuckle, Steering
- Replaces: 15956779
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Knuckle, Driver Side
Part Number: 15684319
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Blazer | Base, LS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Knuckle, Driver Side
Part Number: 18060559
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Steering Knuckle, Passenger Side
Part Number: 14013072
Product Specifications
- Other Name: Knuckle Assembly, Steering; Knuckle; Knuckle Kit, Steering
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1991 Chevrolet Blazer | Custom Deluxe, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
View related parts
Chevrolet Blazer Steering Knuckle, Driver Side
Part Number: 14013071
Product Specifications
- Other Name: Knuckle Assembly, Steering; Knuckle; Knuckle Kit, Steering
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1991 Chevrolet Blazer | Custom Deluxe, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
View related parts
Chevrolet Blazer Knuckle, Driver Side
Part Number: 18060571
Product Specifications
- Other Name: Knuckle Assembly, Steering; Knuckle, Steering
- Position: Driver Side
- Replaces: 15981173
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Steering Knuckle, Passenger Side
Part Number: 18060564
Product Specifications
- Other Name: Knuckle Assembly, Steering; Knuckle; Knuckle, Steering
- Position: Passenger Side
- Replaces: 15958716
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1998 Chevrolet Blazer | Base, LS, LT | 6 Cyl 4.3 L GAS

Chevrolet Blazer Steering Knuckle

Our website offers an extensive catalog of genuine Chevrolet Blazer Steering Knuckle at unbeatable prices. Every OEM Chevrolet Blazer Steering Knuckle comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Blazer Steering Knuckle Parts Questions & Experts Answers

Knuckle, Passenger Side
18060560
Q: How to replace the steering knuckle in a coil spring suspension system on Chevrolet Blazer?
A: The coil spring suspension replacement of a Steering Knuckle requires first lifting and supporting the vehicle and then removing the tire followed by the wheel. A suitable jack should be used to support the lower Control Arm during Wheel Hub and bearing removal. First disconnect the electronic suspension control (ESC) link rod from its sensor before detaching the outer tie rod from the knuckle. First remove the brake hose bracket retaining bolt from the knuckle and then use j 43631 Ball Joint remover with j 45851 Ball Joint separator protector adapters to remove the upper retaining nut which isolates the upper Ball Joint from the Steering Knuckle followed by removing the lower Ball Joint. The mechanic should remove the Steering Knuckle followed by a cleaning step which removes contaminants from the upper and lower ball joints as well as the Tie Rod End while checking the tapered areas of the knuckle. Steering knuckles must be replaced when tapered holes show signs of elongation or out-of-roundness or damage. Lay the Steering Knuckle into position then attach the lower Ball Joint next and finish with the retaining nut tightened to 100 nm (74 ft. Lbs.). The upper Ball Joint requires installation on the Steering Knuckle before implementing its retaining nut which should get tightened to 50 nm (37 ft. Lbs.). The brake hose bracket retaining bolt fits onto the knuckle and receives a torque of 9 nm (80 inch lbs.). Now secure the outer tie rod into position on the Steering Knuckle and the Wheel Hub and bearing assembly. Attach esc link rod to sensor before installing tire and wheel and removing vehicle stands before lowering the car.