How to replace the power mirror switch on Chevrolet Cavalier?

The procedure for power mirror switch replacement starts with detaching the door trim panel before disconnecting the power mirror switch electrical connection. Turn the set screw counterclockwise until you can remove the switch from its position in the upper extension trim panel. Before installing the switch place it on the trim panel and secure the set screw at 1.4 N.m (12 lb in). Last connect the electrical connector to the switch while reinstalling the door trim panel.

OEM Chevrolet Cavalier Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mirror Switch found

View related parts
Chevrolet Cavalier Mirror Switch, Rear
Part Number: 22643143
Product Specifications
- Other Name: Switch, Rear View Mirror; Power Mirror Switch; Switch
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Cavalier | Base, LS, LS Sport, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS

Chevrolet Cavalier Mirror Switch

Our website offers an extensive catalog of genuine Chevrolet Cavalier Mirror Switch at unbeatable prices. Every OEM Chevrolet Cavalier Mirror Switch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Cavalier Mirror Switch Parts Questions & Experts Answers

Mirror Switch, Rear
22643143
Q: How to replace the power mirror switch on Chevrolet Cavalier?
A: The procedure for power mirror switch replacement starts with detaching the door trim panel before disconnecting the power mirror switch electrical connection. Turn the set screw counterclockwise until you can remove the switch from its position in the upper extension trim panel. Before installing the switch place it on the trim panel and secure the set screw at 1.4 N.m (12 lb in). Last connect the electrical connector to the switch while reinstalling the door trim panel.