How to replace the lower ball joint on Chevrolet Classic?

Start the job by taking off the lower Control Arm and attaching it to a vise. Work with a 3 mm (&frac18; inch) and a 13 mm (½ inch) drill to make three pilot holes in the riveted Ball Joint attachment to the lower Control Arm afterward complete the drilling process. Pull out the Ball Joint from the lower Control Arm using the Ball Joint separator tool (J 43828). Position the new Ball Joint into the Control Arm and keep to the fastener notice in service precautions. Follow the indicator from the Ball Joint kit installation sheet to place screws and nuts on the Ball Joint bolts then tighten them to Ball Joint kit measured values. Reinstall the lower Control Arm at the end of the process.

OEM Chevrolet Classic Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ball Joint found

View related parts
Chevrolet Classic Ball Joint
Part Number: 88967438
$53.24 MSRP: $106.88
You Save: $53.64 (51%)
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Lower Ball Joint; Stud, Front Wheel Lower Control Arm
- Position: Front Lower
- Replaces: 22157023
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Classic | Base, LS | 4 Cyl 2.2 L GAS

Chevrolet Classic Ball Joint

Our website offers an extensive catalog of genuine Chevrolet Classic Ball Joint at unbeatable prices. Every OEM Chevrolet Classic Ball Joint comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Classic Ball Joint Parts Questions & Experts Answers

Ball Joint
88967438
Q: How to replace the lower ball joint on Chevrolet Classic?
A: Start the job by taking off the lower Control Arm and attaching it to a vise. Work with a 3 mm (⅛ inch) and a 13 mm (½ inch) drill to make three pilot holes in the riveted Ball Joint attachment to the lower Control Arm afterward complete the drilling process. Pull out the Ball Joint from the lower Control Arm using the Ball Joint separator tool (J 43828). Position the new Ball Joint into the Control Arm and keep to the fastener notice in service precautions. Follow the indicator from the Ball Joint kit installation sheet to place screws and nuts on the Ball Joint bolts then tighten them to Ball Joint kit measured values. Reinstall the lower Control Arm at the end of the process.

Related Chevrolet Classic Parts

Browse Chevrolet Classic Ball Joint by Years

2005 2004