How to replace the brake fluid level sensor on Chevrolet Classic?

To install the new brake fluid level sensor you need to disconnect the electrical connector first then use needle-nose pliers to press and release the sensors retaining tabs at its end. Finally push the sensor through the reservoir to take it out. Insert the brake fluid level sensor into the reservoir until its retaining tabs lock in place then connect the electrical connector to the sensor.

OEM Chevrolet Classic Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
Chevrolet Classic Level Sensor
Part Number: 18012741
$12.95 MSRP: $25.15
You Save: $12.20 (49%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Brake Master Cylinder Reservoir; Brake Proportioning Valve; Level Indicator; Fluid Sensor; Brake Pressure Warning Switch; Pressure Metering Valve; Reservoir, Brake Master Cylinder
- Replaces: 18029973, 18043666, 18040246
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Classic | Base, LS | 4 Cyl 2.2 L GAS

Chevrolet Classic Brake Fluid Level Sensor

Our website offers an extensive catalog of genuine Chevrolet Classic Brake Fluid Level Sensor at unbeatable prices. Every OEM Chevrolet Classic Brake Fluid Level Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Classic Brake Fluid Level Sensor Parts Questions & Experts Answers

Level Sensor
18012741
Q: How to replace the brake fluid level sensor on Chevrolet Classic?
A: To install the new brake fluid level sensor you need to disconnect the electrical connector first then use needle-nose pliers to press and release the sensors retaining tabs at its end. Finally push the sensor through the reservoir to take it out. Insert the brake fluid level sensor into the reservoir until its retaining tabs lock in place then connect the electrical connector to the sensor.