OEM Chevrolet Classic Wheel Hub

Chevrolet Classic Wheel Hub Parts and Q&A

• Hub & Bearing
  88957259
  Q: How to replace the front wheel hub and bearing on Chevrolet Classic?

  A:

  Start by raising the vehicle and removing the wheel assembly and tire before you can begin working on the front Wheel Bearing and hub. Start by removing the wheel drive shaft nut followed by the brake rotor. Detach the hub and bearing assembly from the Steering Knuckle after removing the hub and bearing assembly bolts. The installation of the hub and bearing assembly to the Steering Knuckle requires you to tighten the hub and bearing assembly bolts to 95 nm (70 ft. Lbs.). The next steps should be to install the brake rotor followed by the wheel drive shaft nut then the tire and wheel assemblies. The final test involves checking the front wheel alignment.
• Hub & Bearing, Rear
  12413003
  Q: How to replace the rear wheel hub and bearing on Chevrolet Classic?

  A:

  To perform the Wheel Bearing and hub replacement work first support and lift the vehicle then take out the wheel and tire parts. When handling the Brake Drum do not strike it directly to protect the bearing and remove the component next. Begin by taking out part of the hub-and-bearing assembly from the axle then work toward removing the top rear bolt and nut since they remain caught by the Brake Shoe. Unplug the sensor wire from the abs wheel speed system and take out all parts of the hub and bearing assembly. After wiring the abs sensor tap, install the hub and bearing unit while setting the first bolt in place first before placing it into the axle. After applying the specified torque to hub bolts install the Brake Drum then put on tires and wheels before lowering the vehicle.