How to replace the brake backing plate on Chevrolet Classic?

Begin replacing a Brake Backing Plate by properly supporting the vehicle and removing the tire-wheel assembly followed by the Brake Drum and brake shoes. The process begins by removing the universal spring and Wheel Cylinder followed by disconnecting the Parking Brake Cable from the backing plate before finishing by removing the rear Wheel Hub and backing plate. You should start installation by putting the new backing plate followed by the rear Wheel Hub and finally attaching the Parking Brake Cable to the backing plate. First install the Wheel Cylinder then attach the universal spring and finally add the brake shoes. Brake drums must be adjusted followed by Brake Drum installation and brake hydraulic system bleeding before the parking brake adjustment and restoration of tire and wheel assembly and lowering the car.

OEM Chevrolet Classic Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Backing Plates found

View related parts
Chevrolet Classic Splash Shield, Front
Part Number: 22698358
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005 Chevrolet Classic | Base | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Classic Backing Plate, Passenger Side
Part Number: 18025173
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Passenger Side
- Replaces: 18019257
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Classic | Base, LS | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Classic Backing Plate, Driver Side
Part Number: 18025172
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Driver Side
- Replaces: 18019256
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Classic | Base, LS | 4 Cyl 2.2 L GAS

Chevrolet Classic Brake Backing Plate

Our website offers an extensive catalog of genuine Chevrolet Classic Brake Backing Plate at unbeatable prices. Every OEM Chevrolet Classic Brake Backing Plate comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Classic Brake Backing Plate Parts Questions & Experts Answers

Splash Shield, Front
22698358
Q: How to replace the brake backing plate on Chevrolet Classic?
A: Begin replacing a Brake Backing Plate by properly supporting the vehicle and removing the tire-wheel assembly followed by the Brake Drum and Brake Shoes. The process begins by removing the universal spring and Wheel Cylinder followed by disconnecting the Parking Brake Cable from the backing plate before finishing by removing the rear Wheel Hub and backing plate. You should start installation by putting the new backing plate followed by the rear Wheel Hub and finally attaching the Parking Brake Cable to the backing plate. First install the Wheel Cylinder then attach the universal spring and finally add the brake shoes. Brake drums must be adjusted followed by Brake Drum installation and brake hydraulic system bleeding before the parking brake adjustment and restoration of tire and wheel assembly and lowering the car.