OEM Chevrolet Colorado Clutch Master Cylinder

Chevrolet Colorado Clutch Master Cylinder Parts Questions & Experts Answers

• Master Cylinder
  24249143
  Q: How to Service and Repair the Clutch Master Cylinder on Chevrolet Colorado?

  A:

  The white plastic sleeve on the quick connect requires use of the hydraulic clutch line separator (J 42371) to push back and detach the hydraulic Clutch Hose from the clutch actuator quick connect. Remove the retainer from the clutch pedal pin through a flat bladed tool that separates the Clutch Master Cylinder push rod from the pedal assembly before the retainer becomes useless. Raise the vehicle into position while supporting its weight. Then remove the clutch hydraulic hose retainer from inside the fender before lowering down the vehicle. After rotating the Clutch Master Cylinder clockwise 1/8 turn users can remove the assembly with its hydraulic hose from the cowl. When installing the Clutch Master Cylinder position the reservoir cap at the 1:30 position before rotating clockwise 1/8 turn until complete insertion with the cap oriented at the 12:00 position. Reverse the motion to raise the vehicle one more time before sliding the quick connect fitting into the Clutch Slave Cylinder. You will hear a "click" when it's properly seated so gently tug on the fitting to confirm proper retention. After setting the clutch hydraulic hose retainer to the inner fender position, lower the vehicle because you need to insert a new retainer into the Clutch Master Cylinder push rod and push the push rod onto the clutch pedal pin. The clutch hydraulic system requires bleeding only when adjustments to the clutch release switch and clutch pedal position switch completion.