How to replace the Brake Proportioning Valve on Chevrolet Express 1500?

First raise and stabilize the vehicle with safety stands to replace its combination valve. Disconnect the electrical plug from the combination valve before separating its lines to front and back brakes. Pull out the bolt that holds the combination valve to the frame and take the valve out. Place the combination valve onto the frame and thread in the bolt before tightening it to 10 nm (88 inch lbs.). Secure the front and rear brake pipes to their connections at the combination valve using moderate force of 30 nm. Reattach the electric connector to the combination valve then use the proper procedure to remove air from the brake lines.

OEM Chevrolet Express 1500 Brake Proportioning Valve

Proportioning Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Proportioning Valve found

View related parts
Chevrolet Express 1500 Pressure Metering Valve
Part Number: 15881645
Product Specifications
- Other Name: Valve Assembly-Brake Combination; Brake Proportioning Valve; Valve, Hydraulic Brake Combination/Monitoring Valve
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 Chevrolet Express 1500 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

Chevrolet Express 1500 Brake Proportioning Valve

Our website offers an extensive catalog of genuine Chevrolet Express 1500 Brake Proportioning Valve at unbeatable prices. Every OEM Chevrolet Express 1500 Brake Proportioning Valve comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Express 1500 Brake Proportioning Valve Parts Questions & Experts Answers

Pressure Metering Valve
15881645
Q: How to replace the Brake Proportioning Valve on Chevrolet Express 1500?
A: First raise and stabilize the vehicle with safety stands to replace its combination valve. Disconnect the electrical plug from the combination valve before separating its lines to front and back brakes. Pull out the bolt that holds the combination valve to the frame and take the valve out. Place the combination valve onto the frame and thread in the bolt before tightening it to 10 nm (88 inch lbs.). Secure the front and rear brake pipes to their connections at the combination valve using moderate force of 30 nm. Reattach the electric connector to the combination valve then use the proper procedure to remove air from the Brake Lines.