To change the transmission fluid Transmission
Oil Cooler on a 4l60-e/4l65-e/4l70-e automatic transmission, first remove the grille assembly and put a drain pan under the vehicle. Relax each of the Transmission Oil Cooler lines from the Transmission Oil Cooler and then take out the Oil Cooler lines. After that, remove the 4 bolts holding the Transmission Oil Cooler to the radiator support and remove the Oil Cooler. First, put in the four bolts that hold the Oil Cooler to the radiator support and tighten them to 10 nm (89 inch lbs.). Attach the Oil Cooler lines to the Transmission Oil Cooler and make sure they are tightened with a torque of 23 nm (17 ft. Lbs.). After this, take out the drain pan and put the grille assembly back in place.