How to replace the battery sensor on Chevrolet Impala?

Start battery current sensor replacement work by detaching the instrument panel (I/P) electrical connector at the battery current sensor location. Take off the positive and negative battery wires before cutting the tape and tie straps holding the battery current sensor onto the negative wire. You can slide the battery current sensor off the Battery Cable by squeezing its cable branches while matching its position for future installation. Place the new battery current sensor right onto the Battery Cable with its tape facing the opposite direction. Apply new tie straps and electrical tape on both sides to attach the sensor onto the negative Battery Cable when you have installed the correct battery current sensor. Replace the positive and negative battery cables afterward. After that step, connect the electrical connector of the i/p harness to the battery current sensor.

OEM Chevrolet Impala Battery Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Battery Sensors found

View related parts
Chevrolet Impala Sensor
Part Number: 13585479
$14.32 MSRP: $22.45
You Save: $8.13 (37%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Battery; Battery Current Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2019 Chevrolet Impala | LS, LT, LTZ | 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Chevrolet Impala Battery Current Sensor, Green Line
Part Number: 13505369
$19.14 MSRP: $35.94
You Save: $16.80 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Battery; Voltage Sensor; Negative Cable Cover; Sensor
- Replaces: 13502261
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2020 Chevrolet Impala | 50th Anniversary Edition, Eco, LS, LT, LTZ, Police, Premier, SS | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

Chevrolet Impala Battery Sensor

Our website offers an extensive catalog of genuine Chevrolet Impala Battery Sensor at unbeatable prices. Every OEM Chevrolet Impala Battery Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Impala Battery Sensor Parts Questions & Experts Answers

Battery Current Sensor, Green Line
13505369
Q: How to replace the battery sensor on Chevrolet Impala?
A: Start battery current sensor replacement work by detaching the instrument panel (I/P) electrical connector at the battery current sensor location. Take off the positive and negative battery wires before cutting the tape and tie straps holding the battery current sensor onto the negative wire. You can slide the battery current sensor off the Battery Cable by squeezing its cable branches while matching its position for future installation. Place the new battery current sensor right onto the Battery Cable with its tape facing the opposite direction. Apply new tie straps and electrical tape on both sides to attach the sensor onto the negative Battery Cable when you have installed the correct battery current sensor. Replace the positive and negative battery cables afterward. After that step, connect the electrical connector of the i/p harness to the battery current sensor.