Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2009 Chevrolet Impala Battery Sensor

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Battery Sensor found

  • 2009 Chevy Impala Battery Sensor - 13505369
    2009 Chevy Impala Battery Sensor Diagram - 13505369
    View related parts

    2009 Chevrolet Impala Battery Current Sensor, Green Line

    Part Number: 13505369
    $19.14 MSRP: $35.94
    You Save: $16.80 (47%)
    ADD TO CART
    Product Specifications
    • Other Name: Sensor, Battery; Voltage Sensor; Negative Cable Cover; Sensor
    • Replaces: 13502261
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 2.8 x 2.8 x 2.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 13505369
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2009 Chevrolet Impala Submodels:
    • 50th Anniversary Edition, Eco, LS, LT, LTZ, Police, Premier, SS | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2009 Chevrolet Impala Battery Sensor

With a comprehensive array of OEM 2009 Chevrolet Impala Battery Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Impala Battery Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Impala Battery Sensor Parts Questions & Experts Answers

  • Q: How to replace the Battery Sensor for RPOs LZE-3.5L Flex Fuel, LZ4-3.5L Gas, and LZ8-3.9L Flex Fuel on 2009 Chevrolet Impala?
    A: To install the new battery current sensor you must first unplug the instrument panel (I/P) electrical connector from the battery current sensor. Disconnect the battery cables and untie their straps before removing the battery current sensor from the positive Battery Cable. Before pulling out the sensor press the Battery Cable branches together and write down the current sensor position. Slide the battery current sensor off the cable. Place the new battery current sensor onto the Battery Cable with the tape tab aimed towards the positive terminal. Use new ties and electrical tape to fasten the battery current sensor to the positive battery wire before adding the battery cables back. Finally connect the i/p sensor connector after setup.

Related 2009 Chevrolet Impala Parts

Alternate Year Models

+
2008 Chevrolet Impala Battery Sensor 2010 Chevrolet Impala Battery Sensor