How to replace the rear Trunk Lid Lift Support on Chevrolet Impala?

You need to start with supporting and opening the rear compartment before you begin. A small flat-bladed tool should be used to lift the retainer on both ends of the rear compartment strut. Push down with force when you reach the end point of the liftgate/hood rod installation to prevent accidental damage. Take the rear compartment strut off the hinges by removing it from the ball studs. Bring it out of the vehicle. Set the top and bottom of the rear compartment strut onto its ball studs on the hinge, push the bottom ball stud first and then the top into place until the hole seats completely. After those actions install the support back into its place and close the lower and upper strut retainers.

OEM Chevrolet Impala Trunk Lid Lift Support

Lift Strut Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Trunk Lid Lift Supports found

View related parts
Chevrolet Impala Lift Cylinder, Rear
Part Number: 25964300
$25.03 MSRP: $37.25
You Save: $12.22 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Trunk Lid Lift Support; Lift Support; Strut
- Position: Rear
- Replaces: 15284658
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Lift Cylinder, Rear
Part Number: 25964299
$25.05 MSRP: $37.29
You Save: $12.24 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Trunk Lid Lift Support; Lift Support; Strut; Strut, Trunk Lid
- Position: Rear
- Replaces: 15284657
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Lift Cylinder, Rear
Part Number: 20998171
$24.00 MSRP: $35.71
You Save: $11.71 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Rear Compartment Lid; Trunk Lid Lift Support; Lift Support; Support Strut; Strut, Rear Compartment Lid Or Tail Gate Counter Balance
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Lift Cylinder, Rear
Part Number: 10311812
$39.59 MSRP: $62.01
You Save: $22.42 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Trunk Lid Lift Support; Lift Support; Strut
- Position: Rear
- Replaces: 10425344
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Lift Cylinder, Rear
Part Number: 10315945
Product Specifications
- Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Trunk Lid Lift Support; Lift Support; Strut
- Position: Rear
- Replaces: 10425343, 10309042
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

Chevrolet Impala Trunk Lid Lift Support

Our website offers an extensive catalog of genuine Chevrolet Impala Trunk Lid Lift Support at unbeatable prices. Every OEM Chevrolet Impala Trunk Lid Lift Support comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Impala Trunk Lid Lift Support Parts Questions & Experts Answers

Lift Cylinder, Rear
10311812
Q: How to replace the rear Trunk Lid Lift Support on Chevrolet Impala?
A: You need to start with supporting and opening the rear compartment before you begin. A small flat-bladed tool should be used to lift the retainer on both ends of the rear compartment strut. Push down with force when you reach the end point of the liftgate/hood rod installation to prevent accidental damage. Take the rear compartment strut off the hinges by removing it from the ball studs. Bring it out of the vehicle. Set the top and bottom of the rear compartment strut onto its ball studs on the hinge, push the bottom ball stud first and then the top into place until the hole seats completely. After those actions install the support back into its place and close the lower and upper strut retainers.