OEM Chevrolet Metro Fan Motor

Chevrolet Metro Fan Motor Parts Questions & Experts Answers

• Fan Motor
  96068060
  Q: How to service the radiator cooling fan motor on Chevrolet Metro?

  A: Service of the Radiator cooling Fan Motor requires disconnecting first the negative Battery Cable and draining the engine cooling system. Begin by removing the upper hose from the Radiator with the hose clamp release and disconnecting the Radiator cooling fan electric connector. The technician should begin by raising and supporting the vehicle then remove one lower mounting bolt from the Fan Shroud. Electrical disconnectors are removed from the cooling fans as one steps through these actions: lower the vehicle while taking out the bolts that attach fan cooling to upper Radiator then pull out the fan. Installation begins with placing the Radiator cooling fan inside the vehicle before inserting both upper bolts through the bolt holes of the upper Fan Shroud. Insert the Radiator and the fan into their proper position on the core support while securing the two upper-mounting bolts to 10 nm (89 inch lbs.). You should both lift and support the vehicle before installing the lower mounting bolt to the Fan Shroud while tightening it to 10 nm (89 inch lbs.). Begin by lowering the vehicle then plug in the Radiator cooling fan electrical connector while attaching and securing the upper hose to the Radiator with hose clamp. The process ends by filling the engine cooling system before restoring the negative Battery Cable.