OEM Chevrolet Metro Steering Knuckle

Front Steering Knuckle
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Steering Knuckles found

  • Chevy Metro Steering Knuckle - 30013299
    Chevy Metro Steering Knuckle Diagram - 30013299
    View related parts
    Product Specifications
    • Other Name: Knuckle, Rear Suspension; Knuckle, Rear Wheel
    • Position: Rear Driver Side
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1998-2000 Chevrolet Metro | Base, LSi | 3 Cyl 1.0 L GAS, 4 Cyl 1.3 L GAS
  • Chevy Metro Steering Knuckle - 30013298
    Chevy Metro Steering Knuckle Diagram - 30013298
    View related parts
    Product Specifications
    • Other Name: Knuckle, Rear Suspension; Knuckle, Rear Wheel
    • Position: Rear Passenger Side
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1998-2001 Chevrolet Metro | Base, LSi | 3 Cyl 1.0 L GAS, 4 Cyl 1.3 L GAS
  • Chevy Metro Steering Knuckle - 30013297
    Chevy Metro Steering Knuckle Diagram - 30013297
    View related parts
    Product Specifications
    • Other Name: Knuckle, Rear Suspension; Knuckle, Rear Wheel
    • Position: Rear Passenger Side
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1998-2000 Chevrolet Metro | Base, LSi | 3 Cyl 1.0 L GAS, 4 Cyl 1.3 L GAS
  • Chevy Metro Steering Knuckle - 30013293
    Chevy Metro Steering Knuckle Diagram - 30013293
    View related parts
    Product Specifications
    • Other Name: Knuckle, Steering
    • Position: Driver Side
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1998-2000 Chevrolet Metro | Base, LSi | 3 Cyl 1.0 L GAS, 4 Cyl 1.3 L GAS
  • Chevy Metro Steering Knuckle - 30013292
    Chevy Metro Steering Knuckle Diagram - 30013292
    View related parts
    Product Specifications
    • Other Name: Knuckle, Steering
    • Position: Driver Side
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1998-2001 Chevrolet Metro | Base, LSi | 3 Cyl 1.0 L GAS, 4 Cyl 1.3 L GAS
  • Chevy Metro Steering Knuckle - 30013291
    Chevy Metro Steering Knuckle Diagram - 30013291
    View related parts
    Product Specifications
    • Other Name: Knuckle, Steering
    • Position: Passenger Side
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1998-2000 Chevrolet Metro | Base, LSi | 3 Cyl 1.0 L GAS, 4 Cyl 1.3 L GAS
  • Chevy Metro Steering Knuckle - 30013290
    Chevy Metro Steering Knuckle Diagram - 30013290
    View related parts
    Product Specifications
    • Other Name: Knuckle, Steering
    • Position: Passenger Side
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1998-2001 Chevrolet Metro | Base, LSi | 3 Cyl 1.0 L GAS, 4 Cyl 1.3 L GAS

Chevrolet Metro Steering Knuckle

Our website offers an extensive catalog of genuine Chevrolet Metro Steering Knuckle at unbeatable prices. Every OEM Chevrolet Metro Steering Knuckle comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Metro Steering Knuckle Parts Questions & Experts Answers

  • Q: How to service and repair the steering knuckle on Chevrolet Metro?
    A: In servicing and repairing the Steering Knuckle, one should start by lifting and supporting the vehicle. Take off the tire and wheel assembly, then the brake caliper, caliper carrier, and rotor. For abs equipped vehicles, unplug the Wheel Speed Sensor electrical connector and remove Wheel Speed Sensor from the knuckle with one bolt. Unstake and remove drive axle nut and washer. If you are going to replace the knuckle, remove the hub with two wheel nuts, the wheel hub remover (J 34866), and the slide hammer (J2619-01). Take away the cotter pin and castle nut from the Tie Rod End before removing the Tie Rod End from the knuckle using the ball joint remover (J21687-02). Then pull the ball stud nut and bolt to disconnect the ball joint from the knuckle and the two strut-to-knuckle bolts and nuts to remove the Steering Knuckle. For installation, dust the outside of the hub shaft with a light coat of wheel bearing grease, gm p/n 1051344. If for example you are fitting a new knuckle, fit the hub and outer bearing to it. Secure the Steering Knuckle to the strut with the help of two strut tethering bolts as well as nuts that must be tightened to 80 nm (59 ft. Lbs.). Mount the ball stud to the knuckle with the bolt and nut, and tighten up to 60 nm (44 ft. Lbs.). Finally, attach the Tie Rod End to the knuckle using the castle nut and cotter pin, toronto the castle nut to 43 nm (32 ft. Lbs.). Put on the wheel drive shaft nut and washer, and secure the brake rotor, caliper carrier, and caliper. Do not over tighten the drive axle nut to 175 nm (129 ft. Lbs.) and stake it with a hammer and punch. Rejoin the wheel speed electrical connector and slide the Wheel Speed Sensor onto the knuckle and bolt it into place using one bolt and tighten to 10 nm (89 inch lbs.). Finally, install the tire and wheel assembly and lower the vehicle.

Related Chevrolet Metro Parts