How to replace the Back Up Light on Chevrolet Monte Carlo?

Take off the screws holding the back up lamp before disconnecting it from the bumper fascia. Loosen the back up lamp socket with a counterclockwise twist before you take out the back up lamp bulb from the socket. To put the back up lamp bulb in place just push it into the socket and fasten the socket by rotating it right. Secure the back up lamp onto its slot on the rear bumper fascia with screws until you reach a torque specification of 2 N.m (18 lb in). Pay attention to the instructions on the Fastener Notice in the Service Precautions section.

OEM Chevrolet Monte Carlo Back Up Light

Reverse Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Back Up Lights found

View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Driver Side Part Number: 5978583
$78.38 MSRP: $149.52
You Save: $71.14 (48%)
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly, Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Passenger Side Part Number: 5978586
Product Specifications
- Other Name: Lamp Assembly-Tail; Back Up Light; Tail Light; Tail Lamp; Lamp, Tail Lamp
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Driver Side Part Number: 5978585
Product Specifications
- Other Name: Lamp Assembly-Tail; Back Up Light; Tail Light; Tail Lamp; Lamp, Tail Lamp
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Passenger Side Part Number: 5978584
Product Specifications
- Other Name: Lamp Assembly, Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Passenger Side Part Number: 15913299
Product Specifications
- Other Name: Lamp, Tail Lamp; Tail Light
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Driver Side Part Number: 15913298
Product Specifications
- Other Name: Lamp, Tail Lamp; Tail Light
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Backup Lamp Assembly, Driver Side Part Number: 10440612
Product Specifications
- Other Name: Lamp Assembly-Back Up (Left-Hand); Back Up Light; Lens & Housing; Lamp, Back Up Lamp
- Position: Driver Side
- Replaces: 10289899
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Driver Side Part Number: 10326670
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light Assembly; Tail Lamps; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Replaces: 10419774, 10440909
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Passenger Side Part Number: 10326669
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light Assembly; Tail Lamps; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Replaces: 10419773, 10440908
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Backup Lamp Assembly, Passenger Side Part Number: 10440611
$54.81 MSRP: $81.58
You Save: $26.77 (33%)
Product Specifications
- Other Name: Lamp Assembly-Back Up (Right-Hand); Back Up Light; Lens & Housing; Lamp, Back Up Lamp
- Position: Passenger Side
- Replaces: 10289898
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

Chevrolet Monte Carlo Back Up Light

Want to cut long-term maintenance and repair costs? Choose OEM Back Up Light. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Back Up Light includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Monte Carlo Back Up Light is therefore an important part that any driver of this historic car will hugely benefit from installing. Known for its reliability and performance the Chevrolet Monte Carlo has been in the automotive market since the model year 1969. The Back Up Light plays the role of notifying other vehicles and road users when the Chevrolet Monte Carlo is in the reverse gear, thus, enhancing visibility and eliminating or reducing cases of collisions. It is important concerning safety standards, which often involves the use of a bright white light to indicate the intention of backing up. Being compatible with all Monte Carlo models throughout the six generations, the Back Up Light captures the Chevrolet's adhesion to quality and invention. However, the fifth generation officially manufactured between 1995 to 1999 and the last generation of the Monte Carlo up to the year 2007 incorporated quality lighting systems which made the vehicle to have certain sporty touches. Though the Chevrolet Monte Carlo Back Up Light can be said to be an aesthetic part of car, it serves a very important purpose of boosting drivers' confidence as well as CAR safety. In the automotive market, well constructed and safe, Back Up Light distinguished itself; endowed with Chevrolet's tradition for automobiles that offer excellent performance, safety and reliability on the road for the benefit of all road users.

Chevrolet Monte Carlo Back Up Light Parts and Q&A

Backup Lamp Assembly, Passenger Side
10440611
Q: How to replace the Back Up Light on Chevrolet Monte Carlo?
A:
Take off the screws holding the back up lamp before disconnecting it from the bumper fascia. Loosen the back up lamp socket with a counterclockwise twist before you take out the back up lamp bulb from the socket. To put the back up lamp bulb in place just push it into the socket and fasten the socket by rotating it right. Secure the back up lamp onto its slot on the rear bumper fascia with screws until you reach a torque specification of 2 N.m (18 lb in). Pay attention to the instructions on the Fastener Notice in the Service Precautions section.