How to replace the Tail Light on Chevrolet Monte Carlo?

In order to replace the tail lamp on a monte carlo, start by opening the back cabinet and extract the wingnut from the tail lamp. Pull the rear compartment trim panel back, and take out the lower wingnuts before you can remove the tail lamp from the rear body panel. Unplug the electrical connector to the tail lamp making sure to remember the exact path for the connection of the electrical wire in order to dodge any damages. Next, do not touch that part in-between, please just remove the socket of that part by turning it in the counterclockwise direction and then removing the bulb from the socket. In the same manner, take off the sidemarker lamp socket and turn it counterclockwise which then provide for taking out the bulb from that socket also. To install firstly place the bulb inside tail lamp socket then inside the sidemarker lamp socket and then tighten the sidemarker lamp socket by turning it in clockwise direction. Attach the tail lamp socket by tightening it clockwise, and make sure to organize the electrical wiring to avoid getting damaged. Then connect the electrical connector to the tail lamp, and install the tail lamp again on the back body panel, and fasten it with the lower wingnuts. Pull back the rear compartment trim panel into place and tighten the tail lamp with the upper wingnut before re-securing the rear compartment.

OEM Chevrolet Monte Carlo Tail Light

Tail Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Tail Lights found

View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Driver Side Part Number: 5978583
$78.38 MSRP: $149.52
You Save: $71.14 (48%)
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly, Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Passenger Side Part Number: 5978586
Product Specifications
- Other Name: Lamp Assembly-Tail; Back Up Light; Tail Light; Tail Lamp; Lamp, Tail Lamp
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Driver Side Part Number: 5978585
Product Specifications
- Other Name: Lamp Assembly-Tail; Back Up Light; Tail Light; Tail Lamp; Lamp, Tail Lamp
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Passenger Side Part Number: 5978584
Product Specifications
- Other Name: Lamp Assembly, Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Passenger Side Part Number: 15913299
Product Specifications
- Other Name: Lamp, Tail Lamp; Tail Light
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Driver Side Part Number: 15913298
Product Specifications
- Other Name: Lamp, Tail Lamp; Tail Light
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Backup Lamp Assembly, Driver Side Part Number: 10440612
Product Specifications
- Other Name: Lamp Assembly-Back Up (Left-Hand); Back Up Light; Lens & Housing; Lamp, Back Up Lamp
- Position: Driver Side
- Replaces: 10289899
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Driver Side Part Number: 10326670
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light Assembly; Tail Lamps; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Replaces: 10419774, 10440909
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Passenger Side Part Number: 10326669
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light Assembly; Tail Lamps; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Replaces: 10419773, 10440908
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Backup Lamp Assembly, Passenger Side Part Number: 10440611
$54.81 MSRP: $81.58
You Save: $26.77 (33%)
Product Specifications
- Other Name: Lamp Assembly-Back Up (Right-Hand); Back Up Light; Lens & Housing; Lamp, Back Up Lamp
- Position: Passenger Side
- Replaces: 10289898
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

Chevrolet Monte Carlo Tail Light

Want to cut long-term maintenance and repair costs? Choose OEM Tail Light. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Tail Light includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Monte Carlo Tail Light is appropriately labelled as the Tail Light, the significance of this indicates the reliability and performance of the car. Playing a significant role in increase of safety, the tail light enlightens the rear part of the Chevrolet Monte Carlo to allow other drivers note the size and the distance of the Monta Carlo and indicate stopsigns and turns. Through time, the Chevrolet Monte Carlo has incorporated numerous types of tail lightings; the incandescent, the LED and even the fiber optic style that integrates style and function in the vehicle's lighting system. This implies that every tail light should conform to these standards to work well with the different Monte Carlo models and blend well with the car's design and appearance. Other features like Rear position lamps and centre high mount stop lamps are other features that make the Chevrolet Monte Carlo efficient and safer in roads hence minimizing on accidents that may occur. The Monte Carlo model, which is characterized by a luxurious and sports character and suspension, has gone through six successive generations; however, all of them for many years demonstrated experimental V6 and V8 engines. It has been estimated that every detailed component of the Monte Carlo's model is crucial in the continuity of its tradition and the effecting of its performance and safety. Chevrolet Monte Carlo Tail Light is one of the most popular models with unique designs and improved functions in automotive market, which well represents Chevrolet's policy of excellent quality and technology. Turning to the case of the Chevrolet Monte Carlo, this vital component- specifically, the tail light- now not only extends the functionality of the car but strengthens the vehicle's status as an emblem of the personal luxury car segment.

Chevrolet Monte Carlo Tail Light Parts Questions & Experts Answers

Backup Lamp Assembly, Passenger Side
10440611
Q: How to replace the Tail Light on Chevrolet Monte Carlo?
A:
In order to replace the tail lamp on a monte carlo, start by opening the back cabinet and extract the wingnut from the tail lamp. Pull the rear compartment trim panel back, and take out the lower wingnuts before you can remove the tail lamp from the rear body panel. Unplug the electrical connector to the tail lamp making sure to remember the exact path for the connection of the electrical wire in order to dodge any damages. Next, do not touch that part in-between, please just remove the socket of that part by turning it in the counterclockwise direction and then removing the bulb from the socket. In the same manner, take off the sidemarker lamp socket and turn it counterclockwise which then provide for taking out the bulb from that socket also. To install firstly place the bulb inside tail lamp socket then inside the sidemarker lamp socket and then tighten the sidemarker lamp socket by turning it in clockwise direction. Attach the tail lamp socket by tightening it clockwise, and make sure to organize the electrical wiring to avoid getting damaged. Then connect the electrical connector to the tail lamp, and install the tail lamp again on the back body panel, and fasten it with the lower wingnuts. Pull back the rear compartment trim panel into place and tighten the tail lamp with the upper wingnut before re-securing the rear compartment.