How to replace the Tail Light on 2003 Chevrolet Monte Carlo?

Start by opening the rear compartment to remove the upper wingnut (WINGNUT). Begin by removing the lower wingnuts (WINGNUT) from the tail lamp through the rear compartment trim panel opening. Then remove the tail lamp from its position in the rear body panel. Before disconnecting the tail lamp electrical connector carefully record the routing of electrical wires to prevent damage. First remove the tail lamp socket by rotating it counterclockwise then pull the bulb out of the socket. The sidemarker lamp socket needs to be turned counterclockwise before removing its bulb. Begin bulb installation by performing a three-step process: first back the bulb into the tail lamp socket but before that into the sidemarker lamp socket. Begin your installation sequence with a clockwise turn of the sidemarker lamp socket followed by installation of the tail lamp socket. The electrical connector should be restored to the tail lamp while maintaining proper wire routing. Reattach the tail lamp to the rear body panel and tighten the lower wingnuts (WINGNUT). Next, open the rear compartment trim panel to access the tail lamp and secure it using the upper wingnut (WINGNUT). Finish by closing the rear compartment back up.

OEM 2003 Chevrolet Monte Carlo Tail Light

Tail Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Tail Lights found

View related parts
2003 Chevrolet Monte Carlo Tail Lamp Assembly, Driver Side
Part Number: 10326670
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light Assembly; Tail Lamps; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Replaces: 10419774, 10440909
- Item Weight: 2.50 Pounds
- Item Dimensions: 13.8 x 11.6 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10326670
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2003 Chevrolet Monte Carlo Tail Lamp Assembly, Passenger Side
Part Number: 10326669
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light Assembly; Tail Lamps; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Replaces: 10419773, 10440908
- Item Weight: 2.40 Pounds
- Item Dimensions: 13.1 x 12.0 x 9.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10326669
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2003 Chevrolet Monte Carlo Backup Lamp Assembly, Driver Side
Part Number: 10440612
Product Specifications
- Other Name: Lamp Assembly-Back Up (Left-Hand); Back Up Light; Lens & Housing; Lamp, Back Up Lamp
- Position: Driver Side
- Replaces: 10289899
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.3 x 6.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10440612
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2003 Chevrolet Monte Carlo Backup Lamp Assembly, Passenger Side
Part Number: 10440611
$54.81 MSRP: $81.58
You Save: $26.77 (33%)
Product Specifications
- Other Name: Lamp Assembly-Back Up (Right-Hand); Back Up Light; Lens & Housing; Lamp, Back Up Lamp
- Position: Passenger Side
- Replaces: 10289898
- Item Weight: 0.40 Pounds
- Item Dimensions: 7.9 x 5.3 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10440611
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2003 Chevrolet Monte Carlo Tail Light

With a comprehensive array of OEM 2003 Chevrolet Monte Carlo Tail Light, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Monte Carlo Tail Light are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Monte Carlo Parts Questions & Experts Answers

Q: How to replace the Tail Light on 2003 Chevrolet Monte Carlo?
A: Start by opening the rear compartment to remove the upper wingnut (WINGNUT). Begin by removing the lower wingnuts (WINGNUT) from the tail lamp through the rear compartment trim panel opening. Then remove the tail lamp from its position in the rear body panel. Before disconnecting the tail lamp electrical connector carefully record the routing of electrical wires to prevent damage. First remove the tail lamp socket by rotating it counterclockwise then pull the bulb out of the socket. The sidemarker lamp socket needs to be turned counterclockwise before removing its bulb. Begin bulb installation by performing a three-step process: first back the bulb into the tail lamp socket but before that into the sidemarker lamp socket. Begin your installation sequence with a clockwise turn of the sidemarker lamp socket followed by installation of the tail lamp socket. The electrical connector should be restored to the tail lamp while maintaining proper wire routing. Reattach the tail lamp to the rear body panel and tighten the lower wingnuts (WINGNUT). Next, open the rear compartment trim panel to access the tail lamp and secure it using the upper wingnut (WINGNUT). Finish by closing the rear compartment back up.