Other Name: Motor, Front Side Door Window Regulator; Motor & Drive; Front Door Window Regulator; Rear Door Window Regulator; Quarter Window Regulator; Front Seat Adjuster.
Other Name: Motor Kit, Front Door Window Regulator; Window Motor
Position: Front Driver Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2003 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
Other Name: Motor Kit, Front Door Window Regulator; Window Motor
Position: Front Passenger Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2003 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
Chevrolet Monte Carlo Window Motor
Our website offers an extensive catalog of genuine Chevrolet Monte Carlo Window Motor at unbeatable prices. Every OEM Chevrolet Monte Carlo Window Motor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Monte Carlo Window Motor Parts Questions & Experts Answers
Q: How to replace the power window motor in sedans on Chevrolet Monte Carlo?
A: Sedan owners must start the power Window Motor replacement by trimming the door panel. Place the water deflector first to reach the door mounting screws of the power Window Motor before removing its electrical connector. Take the door access opening to insert the motor assembly for the removal of motor-to-Window Regulator mounting screws. First put a new power Window Motor and door mounting bracket on the Window Regulator while screwing them tightly to 6 nm (53 lb in). Reconnect the motor electrical connector before installing the mounting screws onto the door while tightening them to 10 nm (89 lb in). Position the water deflector back on the door. Prior to mounting the door trim panel discard all retainers then replace them with new ones before assembly. Install the door trim panel retainers to the panel followed by the door panel installation while performing a test of the power window operation.