OEM Chevrolet Prizm Brake Disc

Chevrolet Prizm Brake Disc Parts Questions & Experts Answers

• Rotor
  94854148
  Q: How to service and repair the Brake Disc on Chevrolet Prizm?

  A: To service and brake disc, begin with the Hub Cleaning Kit (J 42450-A) to clean rust or foreign material from mating surface of disc and flange, cause of failure of doing this may cause increased lateral run out and brake neustation. Second, also use a micrometer to measure the thinnest point at the brake disc; If it is greater than the minimum then do not refinish but change the disc. Brake Revival Course.477(if necessary brake refinish) due to severe scoring, brake pulsation or such-if specified-use the disc resurfacing kit (aford order no. J 41013) thoroughly clean rust from the brake disc flange before machining as the brake lathe manufacturer specifies. On the brake lathe. After machining, make sure to produce a non-directional braking surface with 120-grit aluminum oxide sandpaper and a non-directional disc finisher if at all possible. Finally, clean braking surfaces with GM P/N 12377981 and the same braking parts cleaner to get the best performance.