How to replace the torsion bar and support assembly on Chevrolet S10?

The vehicle needs to be lifted before it receives support to replace the Torsion Bar and support assembly. Record the location of the adjuster bolt before using the Torsion Bar loading/unloading tool (J 36202) to mount it onto the adjustment arm and crossmember. Make the necessary tension adjustments on the adjustment arm while recording the turn count for future use. After tool removal you can allow the unloading of the Torsion Bar. After moving the Torsion Bar toward the front position the technician removes the adjustment arm before unfastening the upper nuts and bolts on the support link assembly. Disconnect the frontfork and separate the torsion bars while recording which end faces forward and which side is being taken off. You should remove the lower retaining nuts securing the Torsion Bar links then detach the links from the Torsion Bar support. Fasten the Torsion Bar links to their position on the Torsion Bar support and torque the lower retaining nuts to 50 nm (37 ft. Lbs.). Place the torsion bars in their factory installation positions before reattaching the Torsion Bar support to the frame followed by tightening the upper mounting bolts and nuts to 65 nm (48 ft. Lbs.). Reinstall the adjustment arm to the Torsion Bar support by sliding the Torsion Bar backward until complete engagement occurs. Connect the Torsion Bar loading/unloading tool (J 36202) to the adjustment arm and crossmember while increasing the tension to properly load the Torsion Bar. Use the adjuster bolt tightening procedure from removal to achieve the same number of turns before installing the bolt and adjuster nut. Check wheel alignment by lowering the vehicle after tool removal.

OEM Chevrolet S10 Torsion Bar

Suspension Torsion Bar

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Torsion Bars found

View related parts
Chevrolet S10 Torsion Bar, Front Driver Side
Part Number: 15956503
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Torsion Bar, Front Passenger Side
Part Number: 15956510
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front Chassis
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2003 Chevrolet S10 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Torsion Bar, Front Driver Side
Part Number: 15956509
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2003 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Torsion Bar, Front Passenger Side
Part Number: 15956504
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Torsion Bar, Front Passenger Side
Part Number: 14056382
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front Chassis
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 Chevrolet S10 | Baja, Base, EL, LS, SS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Torsion Bar, Front Driver Side
Part Number: 14056381
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front(Coil Type); Bar, Front Chassis
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 Chevrolet S10 | Baja, Base, EL, LS, SS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Torsion Bar, Front
Part Number: 14034282
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front(Coil Type); Bar, Front Chassis
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet S10 | Base, EL, LS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Torsion Bar, Front
Part Number: 14034281
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front(Coil Type); Bar, Front Chassis
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet S10 | Base, EL, LS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Torsion Bar, Passenger Side
Part Number: 14034278
Product Specifications
- Other Name: Bar; Bar, Front Chassis
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1990 Chevrolet S10 | Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Torsion Bar, Driver Side
Part Number: 14034277
Product Specifications
- Other Name: Bar; Bar, Front Chassis
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1990 Chevrolet S10 | Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS

Chevrolet S10 Torsion Bar

Our website offers an extensive catalog of genuine Chevrolet S10 Torsion Bar at unbeatable prices. Every OEM Chevrolet S10 Torsion Bar comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet S10 Torsion Bar Parts Questions & Experts Answers

Torsion Bar, Front Driver Side
15956503
Q: How to replace the torsion bar and support assembly on Chevrolet S10?
A: The vehicle needs to be lifted before it receives support to replace the Torsion Bar and support assembly. Record the location of the adjuster bolt before using the Torsion Bar loading/unloading tool (J 36202) to mount it onto the adjustment arm and crossmember. Make the necessary tension adjustments on the adjustment arm while recording the turn count for future use. After tool removal you can allow the unloading of the Torsion Bar. After moving the Torsion Bar toward the front position the technician removes the adjustment arm before unfastening the upper nuts and bolts on the support link assembly. Disconnect the frontfork and separate the torsion bars while recording which end faces forward and which side is being taken off. You should remove the lower retaining nuts securing the Torsion Bar links then detach the links from the Torsion Bar support. Fasten the Torsion Bar links to their position on the Torsion Bar support and torque the lower retaining nuts to 50 nm (37 ft. Lbs.). Place the torsion bars in their factory installation positions before reattaching the Torsion Bar support to the frame followed by tightening the upper mounting bolts and nuts to 65 nm (48 ft. Lbs.). Reinstall the adjustment arm to the Torsion Bar support by sliding the Torsion Bar backward until complete engagement occurs. Connect the Torsion Bar loading/unloading tool (J 36202) to the adjustment arm and crossmember while increasing the tension to properly load the Torsion Bar. Use the adjuster bolt tightening procedure from removal to achieve the same number of turns before installing the bolt and adjuster nut. Check wheel alignment by lowering the vehicle after tool removal.

Related Chevrolet S10 Parts

Browse Chevrolet S10 Torsion Bar by Years

2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985